Home /Carbon /

Fire-retardant Multi-Layer Thermal Reflective Attic Insulation,Multi layers aluminum foil insulations for roofing, wall

Fire-retardant Multi-Layer Thermal Reflective Attic Insulation,Multi layers aluminum foil insulations for roofing, wall

Brand Name:bagplastics@vip.163.com
Certification:ISO 9001: 2000, SGS, HACCP, EN13432
Model Number:whatsapp:008613780964661
Minimum Order Quantity:500 units
Delivery Time:15 DAYS
Payment Terms:T/T
Contact Now

Add to Cart

Site Member
Address: 1-320#128 DONGFENG RD, HAIYANG, SHANDONG, CHINA
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Multi layers aluminum foil insulations for roofing, wall and floor

Introduction

Bagease Multi foil Insulation material provide good thermal barrier property,but only with 38mm

thickness.Compared with the traditional insulation material,like glass wool,foam,rock wool,our

material can not only seal your roof from the wind and dust as a envelop,but keep the inside air

multi-foil insulation material can give you a very high thermal barrier rate,7.17M2.k/w.


Bagease Multi Foil Insulation Material is a very flexible ,easy to install and high performance thermal insulation material,in a 38 mm thin,flexible,multi-layer blankets for roofs and walls. It is an insulation solution complying with the highest insulation, airtightness and vapour resistance performance while being only 38mm thick. It is ideal for roofs and attic conversions.


Bagease Multi foil Insulation material provide good thermal barrier property,but only with 38mmthickness.Compared with the traditional insulation material,like glass wool,foam,rock wool,our,material can not only seal your roof from the wind and dust as a envelop,but keep the inside air.multi.foil insulation material can give you a very high thermal barrier rate,7.17M2.k/w.


Working Principle

The flow smoothly,providing you a good ventilation living surrounding.after installing,your roof will

retain dry and warm in winter,while prevent overheating in summer.The thickness is 38mm and

the beams and rafter can be lefted exposed,so our material will save valuable living space in the attic.


Technology Data
Structure
Item
Value
Unit
17 layers
Total layer number
17
layer
Weight of polywool
55
g/m2
Thickness of EPE foam
0.75
mm
Thickness of silver film
12
micron
Quantity of silver film
10
layers
Weight of both sides silver woven
130
g/m2
Strength of woven
MD
580
N/50mm
CD
580
N/50mm
Protective silver film
12
micron
Emissivity of outer
0.05
Emissivity of inner
0.05
R Value of blanket
Sewing size of stitches
Customized
Position of sewing
5
lines
Thickness of finished material(well pressed)
Around 15
mm
Weight of finished roll
10.8
kg
Square meter

Aluminum Bubble Foil Heat Reflective Insulation Sheets for roof floor an dwall

Product Introduction:

The product consists of three layers of aluminum foil with plastic bubble laminated between the aluminum foil,provides excellent insulation: Reflects up to 97% of radiant energy in addition to resisting other types of heat transfer from conduction, convection and radiation. The two side aluminum foil forms an effective barrier against moisture, air currents and vapors.
It is an economical solution for a wide range of industrial, manufacturing and consumer applications.

BageaseBagplastics
Main MaterialAlu + (single / double) PE bubble + Alu
Other Material StructureMPET + (single / double) PE bubble
MPET + (single / double) PE bubble + MPET
Alu + (single / double) PE bubble
Alu + (single / double) PE bubble + Alu
Alu + woven + (single / double) PE bubble + Alu
Alu + woven + (single / double) PE bubble + woven + Alu
Alu + woven + (single / double) PE bubble + Alu + Anti-glare coating Alu + (single / double) PE bubble + woven + Alu + Anti-glare coating
Air Bubble Size¢ : 10mm, H: 2.5mm; ¢ : 10mm, H: 4mm; ¢ : 10mm, H: 6mm; ¢ : 20mm, H: 7mm; ¢ : 25mm, H: 8mm; ¢ : 25mm, H: 10mm
Coating ColorBlue, Green, Pink, Orange or customized
MPET/ Al Foil Thickness:12micron/7 micron
Product Thickness:2mm-10mm
Reflectivity:96%~97%
Normal Roll size:1.2m *30m/roll ; 1.2m *40m/roll; 1.35m *22.25m/roll; can be customized
Packing:1 roll/ clear plastic bag or customized logo printing packing bag accept

Data Sheet:

Material Structure: AL/Bubble/AL
Bubble Size:D10mm*H 4mm(10*2.5/10*4/10*6/20*7/25*10)choose the bubble size
Bubble Weight:130gsm
Roll Width:1.2m (lenth can be customized)
PROPERTIESTEST DATAUNIT
Thickness3.5mm
Weight256g/M2
Emissivity0.03-0.04COEF
Thermal conductivity0.034w/m0
Apparent Density85kg/m3
Reflectivity95-96%
Water Vapour Transmission0.013g/M2kpa
Corrosiondoesn't generate
Tensile Strength(MD)16.98Mpa
Tensile Strength(TD)16.5Mpa

Installation methods and Installation Projects:

  • Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.
  • Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation’s efficiency.
  • Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.
  • Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation’s sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
  • Cover the seams of the bubble insulation with foil tape.

Application:

Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Sun-stop cover and vehicles.
1. Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper
2. Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances
3. Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.

Building insulation material for construction is a brand new heat insulation product manufactured of polyethylene bubble/foam sheet faced with aluminium foil on the one or two sides. It can reflect 97% radiant heat and reduces energy costs used in winter heating and summer cooling. Reflective Foil thermal insulation is only a few millimeters thick, its two sides of aluminium foil reflects more than 97% thermal energy that reaches it .In summer, almost all the sunlight and heat is bounced back into the air, Keeping the heat out of the air conditioned building. In winter, Almost all the heat generated inside the building is retained. Also, The bubble/foam sheet in between the aluminium foil offer thousands of empety air cells, which makes the heat more difficult to pass through.1) Thickness: 0.017-0.03MM
2) Width: 300MM 450MM 500MM
3) Length: as your request
4) Color: transparent/clear,black,green,and so on
5) Net weight: on buyer's option
6) Packing: cartons or pallets.
Product features:
1.100% New material and accept sample order.
2.Excellence and beautiful, the high grade product.
3.Easy to be pulled out and cut.
4. Transparency and no drape and even thickness.
5. Easy to use, can be recycled.

PVA water soluble film
Specifications
Plastic Film

100% new raw material, LDPE , UV resistance

Thickness: 12 mic --50mic --300 mic .

Colour: Transparent, Black, Red, Blue, Green, etc.


The main products of the company are polyvinyl alcohol (PVA) materials, films and bags etc. We have manufactured a series of products of water-soluble PVA bags for various uses.It could be processed according to customers demand of any size and specification.the water-soluble PVA bags are divided into the inner packing bags and the outer packing bags. Their characteristics are as follows:

1,It will dissolve competely under the normal water temperature(20±5℃) after 5-18 sec.

2,Its final products are CO2 and h3O, non-toxic and non-pollution;

3,The inner packing bags can dissolve completely above 3 ℃, while the outer packing bags can issolve completely above 80 ℃.

4,Printing can be done on both the inner packing bags and the outer packing bags, with clear handwriting, and oil ink and bags will dissolve together.

5 The water-soluble bag has no static electricity, h3 stretching intensity and even tensity .

6,The inner packing bags has heat sealing or tying with the water-soluble rope, while the outer packing bags can have nylon string and self-adhesive foil.

7,The size of water-soluble packing bags can range freely between 4cm*4cm---120cm*120cm.

8,Can be weighted exactly, no waste.

China Fire-retardant Multi-Layer Thermal Reflective Attic Insulation,Multi layers aluminum foil insulations for roofing, wall supplier

Fire-retardant Multi-Layer Thermal Reflective Attic Insulation,Multi layers aluminum foil insulations for roofing, wall

Inquiry Cart 0