Fully Automatic Flexo Printer Slotter Die Cutter , Rotary Die Cutting Equipment

Fully Automatic Flexo Printer Slotter Die Cutter , Rotary Die Cutting Equipment

Vacuum Transfer Fully Automatic Lead Feeder Flexo Four Color Printer Slotter Die Cutting With Folder Gluing Machine Link Line is able to print the required words, patterns and other information onto the surface of the carton box , complete carton printing, and complete the carton box folder gluing link line.

Features:

1. This machine is designed and made to high quality and safety standard,with the advantages of high speed,auto control and quick order shift.

2. Computerized control,order setting in touch screen.

3. The folding section adopts belt transfer system assisted with vacuum suction,to make best transfering and folding quality.

4. The gluing section adopts U.S.A VALCO high speed auto-sensor glue spray system.

5. The correction device in the Countering Section can conquer the fish-tail,makes the carton even.

6. The quality of bundle come out from the counter ejector can be set in touch screen.

7. All electronic and pneumatic components are with European standards.

Main Specification:

Feeder Unit:

1. Continuous or skip feeding is available with counter;

2. Copy sun automation lead edge feeder with strong vacuum transfer for

precise and stable feeding;(made from Guangdong province)

3. Variable frequency drive control for vacuum blower fan for increased

or decreased vacuum suction to match different size cardboard.

4. Feeding roll is made of two-layer rubber,inner layer is soft and outer

layer is hard,this makes inner layer more flexible and surface more

wear-resistant,and reduce the flute damage of the cardboard;

5. Dust remove system with brush and segmented vacuum sheets cleaner;

Self-locked system adopts for adjusting feeding rolls gap,motorized

and PLC control of feeder side guides;

6. Motorized backstop forward /backward and up/down position for easy

and quick adjustment;

7. Main motor is protected from starting up when units are not fully

closed and locked.

Printer Unit:

1. With four unit ceramic roller and rubber roller.

2. Mounting roller with left and right both of side locking device,let the

mounting position more accurately.

3. Pneumatic clutch is adopted on the anilox roll to:

(1) Make the roll run at the same speed as the main motor when the unit

is printing;

(2) Make the roll stop when the unit is not printing;

(3) Reduce the possibility of damage to the rubber roll and the anilox

roll for inproper operation;

(4) Allow units which are not in use to be washed up while running.

4. Printing register is digitally controlled by motor and PLC

5. Transverse register is also digital controlled by motor and PLC ±10mm

6. Quick set and self locking pull collars.

7. A fixed device of printing register and brake of electromagnetic clutch

is used when the unit is opened.upon closing the unit,the positions are

precisely restored so the unit is ready for production without

adjustment.

8. Cleaning function can be automatically switched to ensure the ink

recycling thoroughly

9. Automatic resetting after cleaning the printer

10. With six units ceramic roller and four units doctor blade.

11. Ceramic roller LPI according to customer requirement.

Slotting unite:

1. Single shaft five blades slotting ,an internal gear adjusts the height

of the carton box and prevents the lubricating oil from spilling or

leaking onto the cardboard

2. The first pre-creasing,the cardboard not be damaged after prepressing.

3. Upper creasing roll covered by anvil ring,so cardboard is not damaged

easily.

4. Slotting bosses move along liner lead rails and are driven by lead

screws for flexible and precise movement.

5. Upper boss and lower boss are coupled to keep the two knives aligned

while moving,which is helpful to prolong service life.

6. Slotting register and height of carton box are digital controlled by

motor and PLC.

7. Transversal movement of the pre-creasing rolls,and slotting bosses’ are

digital controlled by motor and PLC

8. Motorized controls of the slotting bosses caliber.

9. A protective device prevents the slotting knife from crashing when the

height of the carton box is adjusted.

10. Flexible angle cutting knife can cut 3 or 5 or 7 ply cardboard with no

adjustment,easy to operate.

Die cutting unite:

1. With separate servo motor.

2. Side to side oscillation of anvil drum(45mm)

3. The die drum’s transverse movement can prolong the service life of

anvil cover.

4. Die-cutting register is digitally controlled by motor and PLC

5. The die-cut cylinder lateral register is digitally controlled by motor and

PLC,rang about±10mm

6. Motorized caliper adjustment between anvil roll and die drum.

7. Auto speed compensation system controlled by the independent motor

can achieve the superb die accuracy.

8. Anvil rubber roller speed compensation adopted independent motor for

driving to control the rubber roller speed,the compensation scope is

±3mm.

9. Anvil trimmer to keep surface of the anvil covers flat and smooth.

Anvil cover is Depride made from Germany

Glue machine:

1. Sunction feeding type
2. Automatic spray adhesive system (imports)
3. Left, right,front,back automatic taken together function.
4. Computer control automatic changer order,automatic store orders.
5. Baffle position,touch screen display.
6. Paste head position,touch screen display.

Bellow feeding type:

1. Suction feeding type.

2. Automatic accurately count and automatic out
3. Front baffle adjustment,touch screen display

4. Back baffle adjustment,touch screen display

5. Count out, touch screen display

Hebei SOOME Packaging Machinery Co., Ltd. Specializing in the manufacturer and sales of corrugated box machinery. Since its establishment in 1995, it is located in China“Dongguang”,Cangzhou city.

In order to speed up the production efficiency, there are three production workshops with a plant area of 20000 ㎡, 108 employees, production Capacity of 1800 sets per year.

We put our hearts in our mind to make no effort equipping each product.Especially we developed several new high speed automatically machines which improved the competition ability of our customers,also got the recognition of thousands packing companies from domestics and overseas based on the principle of honest and trustworthy.

Our products find a good sale in Argentina,Russia,India,Italy,Germany,Egypt,Vietnam,Spain,Iran,Turkey and so on.Anyone who cooperate with us is proud of our good after service and open-minded attitude.

Our goal is simple: to sell the best machines at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business is SOOME packaging, to help others achieve their goals.