1.4308 Material Ss Investment Casting , Metal Investment Casting OEM Parts

1.4308 Material Stainless Steel Casting Investment Casting OEM Parts Supplier China

Product Description and Process

SS04 SS316 Stainless Steel Casting Investment Casting OEM Parts Supplier China

Production process: Silica Sol lost wax investment casting process

Machining process: CNC machine, machining center, lathe, mill machine, drill machine, etc.

Product Material and Uses

Normally produce with ASTM A743/A743M Grade CF8, CF8M, CF3, CF3M, ZG0Cr18Ni10, ZG0Cr18Ni9, ZG0Cr18Ni9Ti, ZG0Cr18Ni12Mo2Ti, ZG1Cr18Ni12Mo2Ti, etc.

The stainless steel casting products are widely used for auto-car components, Machinery & Pump Parts, Marine Parts, valve parts, pipe parts, etc.

POPULAR STAINLESS STEEL GRADES: SS 304 | SS 410 | SS 316 | 17-4

We has experience pouring a wide variety of stainless steel alloy casts. We cast stainless steel from miniature to 50 pounds.

The most common alloys we have poured are listed below. We are also capable of pouring other air melt alloys upon your request. Specific material chemistry and mechanical specifications will be provided to you if needed. For your Stainless Steel Castings needs, we can help you out.

Commonly Cast Stainless Steel Alloys:

Stainless Steel 304(1.4308)

This is the most common stainless steel and is applied in different applications. It consists of at least 18% chromium and 8% nickel and has no magnetic properties within its austenitic structure.

Stainless Steel 304L(1.4309)

Corresponds to stainless steel 304. The ‘L’ stands for ‘low carbon’, so this stainless steel has a lower carbon amount to increase weldability and to limit the corrosion sensitivity after welding.

Stainless Steel 316(1.4408)

A better, but more expensive type of corrosion resistant steel is stainless steel 316. This alloy contains at least 16% chromium, 10% nickel and 2% molybdenum. Because of the addition of molybdenum, this stainless steel type is better defended against salt corrosion and acids, and is often applied in chemical industries.

Stainless Steel 316L(1.4409)

Comparable to stainless steel 316 but with a lower carbon level to increase weldability of the stainless steel.

17-4 PH(1.4549)

A high quality stainless steel which is regularly used in the aircraft industry. It is characterized by a high tensile strength, hardness, toughness and is also corrosion resistant.

Stainless Steel - Grade 304 (UNS S30400)

Chemical Formula

Fe, <0.08% C, 17.5-20% Cr, 8-11% Ni, <2% Mn, <1% Si, <0.045% P, <0.03%

Background

Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

Key Properties

These properties are specified for flat rolled product (plate, sheet and coil) in ASTM A240/A240M. Similar but not necessarily identical properties are specified for other products such as pipe and bar in their respective specifications.

Composition

Typical compositional ranges for grade 304 stainless steels are given in table 1.

Table 1. Composition ranges for 304 grade stainless steel

Mechanical Properties

Typical mechanical properties for grade 304 stainless steels are given in table 2.

Table 2. Mechanical properties of 304 grade stainless steel

304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical Properties

Typical physical properties for annealed grade 304 stainless steels are given in table 3.

Table 3. Physical properties of 304 grade stainless steel in the annealed condition

Grade Specification Comparison

Approximate grade comparisons for 304 stainless steels are given in table 4.

Table 4. Grade specifications for 304 grade stainless steel

These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Corrosion Resistance

Excellent in a wide range of atmospheric environments and many corrosive media. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60 °C. Considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.

Heat Resistance

Good oxidation resistance in intermittent service to 870 °C and in continuous service to 925 °C. Continuous use of 304 in the 425-860 °C range is not recommended if subsequent aqueous corrosion resistance is important. Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.

Grade 304H has higher strength at elevated temperatures so is often used for structural and pressure-containing applications at temperatures above about 500 °C and up to about 800 °C. 304H will become sensitized in the temperature range of 425-860 °C; this is not a problem for high temperature applications, but will result in reduced aqueous corrosion resistance.

Heat Treatment

Solution Treatment (Annealing) - Heat to 1010-1120 °C and cool rapidly. These grades cannot be hardened by thermal treatment.

Welding

Excellent weldability by all standard fusion methods, both with and without filler metals. AS 1554.6 pre-qualifies welding of 304 with Grade 308 and 304L with 308L rods or electrodes (and with their high silicon equivalents). Heavy welded sections in Grade 304 may require post-weld annealing for maximum corrosion resistance. This is not required for Grade 304L. Grade 321 may also be used as an alternative to 304 if heavy section welding is required and post-weld heat treatment is not possible.

Machining

A "Ugima" improved machinability version of grade 304 is available in bar products. "Ugima" machines significantly better than standard 304 or 304L, giving higher machining rates and lower tool wear in many operations.

Dual Certification

It is common for 304 and 304L to be stocked in "Dual Certified" form, particularly in plate and pipe. These items have chemical and mechanical properties complying with both 304 and 304L specifications. Such dual certified product does not meet 304H specifications and may be unacceptable for high temperature applications.

Applications

Typical applications include:

Food processing equipment, particularly in beer brewing, milk processing & wine making.

Kitchen benches, sinks, troughs, equipment and appliances

Architectural panelling, railings & trim

Chemical containers, including for transport

Heat Exchangers

Woven or welded screens for mining, quarrying & water filtration

Threaded fasteners

Springs

The latest Stainless Steel Material Grade Standard Contrast

Different Types of Stainless Steel