Gasket Plate Type Cooler heat exchanger suitable suitable for HVAC,
ship, food, chemical, power plant
Advanges of Plate Heat Exchangers
Easy to Remove and Clean
- Plate Heat Exchangers are easy to clean by remove the tie bolts and
slide back the movable frame part. Then the plate pack can be
inspected, pressure cleaned, or removed for refurbishment if
required.
Expandable
- A very significant feature of the plate Heat Exchanger is that it
is expandable. Increasing the Heat Transfer requirements means
simply adding plates instead of buying a new Heat Exchanger, saving
time and money.
High Efficiency
- Because of the pressed patterns in the plates and the relative
narrow gaps, very high turbulence is achieved at relative low fluid
velocity. This combined with counter directional flow results in
very high Heat Transfer coefficients.
Compact Size
- As a result of the high efficiency, less Heat Transfer area is
required, resulting in a much smaller Heat Exchanger than would be
needed for the same duty using other types of Heat Exchangers.
Typically a plate Heat Exchanger requires between 20-40% of the
space required by a tube and shell Heat Exchanger.
Structure of Gasket Plate Heat Exchanger:
Plate heat exchanger is made up by heat transfer plate, sealing
gasket, compression plate, up and down guide bar, pillar, grip
bolts and other major parts.
Plate heat exchanger design selection:
(1) Physical parameters of cold and hot media, such as pH, chloride
content, viscosity, density, thermal conductivity, specific heat,
etc.
(2) The inlet and outlet temperatures of cold and hot media.
(3) Flow of cold or hot medium or flow of one of them.
(4) Cold and hot medium pressure loss requirements.
(5) Intrinsic characteristics of plate heat exchangers, such as
plate material, seal gasket material, etc
Advantages
1, High quality and competitive price , fast delivery.
2,One year life time guarantee.
3, As manufacturer, we can supply the best quality replace parts for
some brands to help you save cost.
4, Customized service, According to the specific requirements of
new products,contact us
What are the advantages of Plate Heat Exchanger?
- High heat transfer coefficient, sensitive temperature control
- Low pressure lose, high operating flexibility
- Compact structure, easy assembly & disassembly
- Long life-time, metal plates to withstand high temperatures and resist corrosion
Introduction to sheet material and application:
material | application |
SUS304 / SUS316L | Purified water, river water, food oil, mineral oil |
Titanium / Pal ladium | Sea water, salt water, salinized substance |
Hadtelloy Alloy / C-276 | Concentrated sulfuric acid, hydrochloric acid, phosphoric acid |
Ni / Nickel | High temperature and high concentration caustic soda |
Material and operating conditions of gasket:
Material | Application | working temperature |
NBR | Water, sea water, mineral oil, salt water | -15—130℃ |
HNBR | High temperature mineral oil, high temperature water | 15—140℃ |
EPDM/HEPDM | Water,Hot water, steam, acid, alkali,caustic | -25—150℃ |
Viton/Fluorine Rubber | Strong acid, strong alkali, mineral oil, grease and fuel oil, etc | 5—200℃ |
NEOPRENE | Acid, alkali, mineral oil, low molecular weight aliphatic
hydrocarbon | 35—130℃ |
Silicon Rubber | High temperature and some corrosive environments | 65—200℃ |
Introduction of plate heat exchanger manufacturer:
Aiprel specializes in heat exchangers, heat exchangers accessories,
manufacturing, sales, and service.
We are a genuine original PHE manufacturer with all components are
produced in our own factory and complete end products.
We passed the ISO9001: 2000 Quality System Certification, ISO14001:
2004 Environmental System Quality Certification. Our registered
capital is 50.00 million, and annual revenue of over RMB 200
million.
With all the manufacturing plants together of over 100,000 square
meters, producing over 20,000 heat exchangers and milloins heat
exchanger accessories, making us one of the world's largest heat
exchange equipment and accessories manufacturers.
We can also produce replacement parts specific for various brand
products. The replacement gaskets and plates are suitable for ALFA,
GEA, APV, Viacrb, Sondex, SWEP, Funke, Hisaka, Sigma, Accessen, etc
. In 2012, Aiprel established its heat exchanger service center to
carry out maintenance of plate heat exchangers, chemical cleaning,
test, renovation and other services. Besides, Aiprel is deploying
global service network to become a global heat exchanger service
expert and respond customers at any time anywhere.