High Speed Automatic Printing Die Cutting Gluing Strapping in Line
Performance and Characteristics
- The machine can finish multi processes one time such as: printing,
slotting, creasing, trimming, corner cutting, punching, die
cutting, folding gluing and so on.
- Machine is designed according to high request and reliable
function, humanization operation, it can setting, revision,
implement, changing and memories in short time, and display data
accurately .
- All of drive rollers are made of high quality steel, hard chrome
plated the surface with grinded.
- Main drive gears adopt high quality steel with heat treatment with
grinded, adopt cross slip system connect each gear, keep gear fix
position, ensure transmission precision.
- The main drive roller adopt keyless connect, decrease the
connection gap, ensure printing precision.
- The machine adopts sealed spray lubrication for gear system,
engineer oil automatic balance device; keep the oil level equal in
each unit.
- Motorized digital phase adjustment with "automatic zero return" and
"memories" function The machine adopts lead edge (or kick feeding),
low demand for the cardboard, fast.
- Main motor is VFD, working stability, low power consumption.All
unit PLC control touch screen
Main Technology parameters
Model | LD240-920 | LD220-1022 | LD200-1224 | LD180-1426 |
Machine inside width (mm) | 2200 | 2400 | 2600 | 2800 |
Max feeding paper siz(mm) | 900*2200 | 1000*2400 | 1200*2600 | 1450*2600 |
Max effective printing size(mm) | 900*2000 | 1000*2200 | 1200*2400 | 1450*2400 |
Min coverage size(mm) | 350*700 | 350*700 | 400*700 | 400*700mm |
Min slotting space(mm) | 190*50*190*50 | 190*50*190*50 | 190*50*190*50 | 190*50*190*50 |
Design speed | 240pcs/min | 220pcs/min | 200pcs/min | 180pcs/min |
Working speed(pcs/min) | 220pcs/min | 200pcs/min | 160-180pcs/min | 150-160pcs/min |
Standard Thickness of printing plate | 6mm | 6mm | 6mm | 6mm |
Printing precision | ±0.5mm | ±0.5mm | ±0.5mm | ±0.5mm |
Thickness of cardboard | 1.2-9mm | 1.2-9mm | 1.2-9mm | 1.2-9mm |
Wall thickness | 50mm | 50mm | 50mm | 50mm |
Main motor power | About 30kw | About 30kw | About 30kw | About 30kw |
Performance and Characteristics:
- The machine can finish multi processes one time such as: printing,
slotting, creasing, trimming, corner cutting, punching, die
cutting, gluing and strapping.
- Machine is designed according to high request and reliable
function, humanization operation, it can setting, revision,
implement, changing and memories in short time, and display data
accurately .
- All of drive rollers are made of high quality steel with temper and
quenching treatment, not change shape when high speed running, hard
chrome plated the surface with grinded.
- Main drive gears adopt high quality steel with heat treatment with
grinded, adopt cross slip system connect each gear, keep gear fix
position, ensure transmission precision.
- The main drive roller adopt keyless connect, decrease the
connection gap, ensure printing precision.
- The machine adopts sealed spray lubrication for gear system,
engineer oil automatic balance device; keep the oil level equal in
each unit.
- Motorized digital phase adjustment with “automatic zero return” and
“memories” function ( options: PLC control with touch screen)
- Lead edge feeder with vacuum sucntion, easy operate, high
precision.
- All units move automatic orderly, locked by pneumatic, alarm
continually
- Main motor is VFD, working stability, low power consumption.
Feed unit
- Light pressure Lead edge feeder with vacuum suction, wind is
adjustable depend on sheet, make sure feed sheet smoothly.
- Main motor with start protecting device, machine cannot run when
machine units aren’t lock.
- Continuous or skip feeding available
- Double feed rollers wrapped with rubber, with groove prevent
overpressure, reduce pressed sheet
- Left-right baffle adjusted by computer with automatic flap, back
baffle adjusted by motorized, front baffle manual synchronous
adjust.
- Dust clearance bush and fan to clean dust on board. Air outlet can
be adjusted as per sheet size
- Machine units move by motorized and move with alarm belling to make
sure safety
Printing unit
- Fast change printing plate, with footstep to control cylinder
rotate clockwise or anticlockwise
- Feed roller, press roller, rubber roller, anilox roller gap adjust
with self-lock part
- Printing phase adjusted by PLC in 360degree with digital input, do
when machine running or stop
- Pneumatic brake device to keep printing register fixed, when units
separate or clean, brake limit gear rotate, keep original gear
position.
- Pneumatic lift anilox roller for ink, motorized ink will no dry.
- Printing cylinder made of seamless steel pipe, be grinded with
chrome plated, do balance treatment, running smooth and steady.
- Lift-down design( when feed sheets anilox roller down in order,
stop sheet lift rollers in order)
- Double diagram pump ink, recycle automatically, clean with water
- Memory function, after clean plate it back to original position
- Printing precision: +-0.5mm
- Printing cylinder horizontal move by motorized
- Steel anilox roller from Haili brand (option: ceramic roller with
doctor blade)
Slotting unit
- Box height adjusted by motorized.
- Slotting phase adjusted by PLC in 360 degree with digital input, do
when machine running or stop.
- Slotting die and crease die move together by motorized
- Crease gap and knife gap adjusted by self-lock mechanism
- Collison protection on slotting knife for height adjust and move,
don’t damage machine
- Slotting knife width 7mm, good quality material, with hot-treatment
and grinded, teeth knife, double-piece trim knife, sharpen and
precision.
Rotary die-cutter unit
- 1.Rubber roller: made of good quality steel, be grinded with chrome
plated.
- 2.Do balance treatment, improve machine running steady
- 3.Rubber cylinder is separate with die cylinder by air cylinder
when no cutting, reduce no-load and prolong blanket use-life.
- 4.Die roller lift-down automatic by pneumatic control( feed sheets
roller go up, stop feeding roller down, make sure correct cutting
for every sheets)
- 5.Rubber roller move 40mm in left and right, wearable average
prolong use-life
- 6.Rubber roller rotates follow die roller by speed compensation
device whatever how rubber diameter change, make sure rubber speed
same as wooden die, keep cut box is consist with wooden die.
- 7.Planetary gear structure used for phase adjustment.
- 8.Phase adjustment by PLC in 360degree with digital input( can be
done when run, stop or clockwise or anticlockwise)
- 9.Machine have repair roller to grind blanket, so it can use many
times.
Folder gluer unit
The printing slotting diecutting machine is equipped with folder
& gluer, which has the advantages of simple structure, high
folding precision and beautiful folding.Its electrical, bearing,
belt chain and other important components are used in Europe,
America, Japan, Taiwan and other well-known enterprises
products;Machine rail smooth, low noise, high efficiency, simple
operation, good safety and reliability, the first choice for
enterprises to get rich products.The technological process and
production parameters of this product are introduced as follows:
1.Equipment process
2 Gluing part basic configuration
* Gluing part
- The position adjustment of gluing head is electric, which can be
controlled by human-machine interface
- Gluing wheel system function. (automatic glue spraying system is
optional)
- equipped with gluing roller servo control to coordinate the
synchronous operation of the host.
* Folding part
- Folding beam electric displacement, human-machine interface
control.
- The front and rear drive shafts are located at the top of the
folding beam.
- Equipped with adjustable folding rod.
- Equipped with elastic roller for conveying belt.
- With lower synchronous conveyor belt.
- Equipped with carton guide positive side roller.
- With upper belt tension set by cylinder, belt extension can
automatically compensate.
*Paper stacking section
- With air pressure paperboard down, before shooting paperboard
paper.
- Equipped with electric adjustment stacking department.
- With front and rear baffle electric displacement function
*Count the discharge part
* the number of cartons per stack can be set from 15~30 for
automatic discharge.
* equipped with board lifting roller device.
* with the paper holder electric adjustment height function.
3 Gluing machine function description:
- Gluing part:
- The horizontal movement of rubber roller is adjusted by electric
screw rod. The size is controlled by man-machine interface
- The gluing part adopts nonstop or gluing system to prevent the glue
solidification when the machine starts at the end of a short
time,the gap of the upper rubber wheel can be adjusted easily,
which can adapt to the gluing of 3-8mm thick paper, and the gluing
amount can be adjusted easily.
- The belt speed of upper and lower beams and the speed of slotting
machine can be adjusted separately, and the gluing folding belt and
conveyor belt are very close to the speed of the slotting machine,
avoiding the problem of paper grabbing or blocking between the
paste box line and the slotting machine.
- The speed of lower belt is separately adjusted by the servo motor,
that is, when the upper and lower belt speed is different, it can
be adjusted to the same, and micro-adjust for rectify correction.
- Adopt belt and rubber covered roller to fold, flexible to adjust
the angle of folding and easy to operate.
- Preloading degree, using up and down sticks adjustable gap
preloading can press 3-8mm paper thick folding box, with
man-machine interface for easy adjustment.
Stacking and counting part:
- Electric stacking and aligning of the cardboard, attain totally
work automatically.
- Adopt electric eye (electric eye signal) to count carton quantity,
easy to setting and operate , structure safety and dependable.
- electric eye count the stacking quantity, accurate output.
4. Mechanical charateristics:
1. The average speed of gluing machine is 8000-12000 / hour, with
high speed and greatly improved production efficiency.
2. Automatic gluing, folding, correction, counting and stacking,
only two~ three workers can complete the whole process.
3. Folding beam adopts elastic pressure wheel and suction belt to
convey accurately.Two-fold beam man-machine correction, electric
adjustment, and with preloading, integral, correction device, so
that the carton folding to eliminate the size of the mouth, reduce
the rejection rate.
4. Equipped with rectify deviation device to prevent scissors
efficient.
5. Automatic patching device, paper receiving, stacking and
discharging are precisely controlled by servo system with fast
circulation speed.It can be moved around according to the folding
size of cardboard.