Class I 3 Ply Non Sterile Tie - On Face Mask

3 Ply Non Sterile Tie - On Face Mask

Function:

1. Secure Tie One
Adjustable, fit comfortable, and attached to outside of mask to eliminate irritation

2. Extra-long Nose Piece
Enclosed aluminum nose piece forms a strong seal for maximum protection

3. PP outer layer
Soft, for maximum protection against fluids

4. Soft-Bound ultrasonics
Ensures strongest construction, eliminating holes and defects

Intended Use:

The surgical face mask is single-use, disposable device, provided non-sterile, and

intended to be used for patients and other persons to reduce the risk of spread of infectionsparticularly in epidemic or pandemic situations.

Structure and Components:

This mask is made by blank mask, nose piece and tie-on belt. The blank mask is made

by three layers. The inner and outer layer are non-woven fabric, the middle layer is Melt-blown polypropylene.

Main performance:

1) Bacterial filtration efficiency: ≥98%;

2) Differential Pressure: ＜60 Pa/cm² ;

3) Microbial cleanliness: ≤30 cfu/g;

4) Splash resistance pressure≥16kPa.

Instruction for tie-on face mask:

1. Open a mask, with the dark side facing outwards, hold the mask by hand and cover it

on your face, make sure that the nose clip is located on the upside of the mask.

2. Pull the mask belts above the ears and tie it appropriately on the top of the head.

3. Pull the rest of the mask belts below the ears and tie it appropriately over the back of the neck.

4. Adjust the nose clip to fit the shape of the bridge of the nose, and then adjust the tightness

of the mask belts to make the mask fit your face.

5. Do not touch the front of the mask when removing a mask. You are supposed to untie the

mask belts first and then discard it into an specified container.

Precautions:

1) Check the package is intact before use, conform the masks and date of manufacture

on the external package, and use it before the expiry date.

2) If you are allergic to non-woven fabric, be cautious using this product.

3) After using the product, please dispose of it according to the requirements of the

environments protection agency or related authorities.

4) This product is a disposable device. It is not recommended to the clean or reuse it. If you feel uncomfortable during use, please stop using it immediately or replace it with a new one.

Hunan EEXI Technology&Service Co., LTD., founded in 2018, is an enterprise engaged in the production of baby and maternity products. The company covers a total area of 88,000 square meters with a building area of 137,000 square meters. After the outbreak of the “COVID–19” in 2020, our company applied and obtained the production license of medical devices and other qualifications within a short time and transformed into the production of KN95, disposable medical masks (non-sterile and sterile, including children size face masks) and surgical masks (non-sterile and sterile). Currently, our company has built 100 production lines for disposable face masks (including two high-speed mask machines) and 150 sets of KN95 equipment. With a total number of over 6000 employees, our company produces more than 10 million disposable masks and more than 6 million masks per day. Worldwide acknowledged certifications such as CE/FDA/ISO, including ISO9001, ISO14001 and ISO13485, certificated by SGS/TUV/CCQS etc.