HIgh Density 0.1mm Silicone Rubber Sheet For Solar Laminator

Customized Color HIgh Density Temperature Silicone Sponge Rubber Sheet In Rolls With 2000*500*0.1 Mm For Solar Laminator

We use raw material (with the latest technology to add negative ions, silver ions, etc.) to produce the silica gel plate, colorful, smooth surface, high transparency, excellent resistance to high and low temperature performance, non-toxic environment protection, odorless, high strength, resistance tear, corrosion resistance, acid and alkali resistance, wear resistance, pressure resistance, aging resistance and excellent insulation and so on.

Basic Product parameters

• Pressure resistance: 4.0KV-10KV
• Operating temperature: -60-220 degrees
• Specific gravity: 1.3
• Hardness :40-90 degrees
• Extensibility: 300%-600%
• Tear strength: 22Kn/m

Product specification

Specification I: thickness: 0.1mm thick to 1.0mm thick

Width: 100mm wide to 1000mm wide

Length: coil (infinite length, conventional 50m roll)

Specification II: Thickness :1mm thick to 20mm thick

Width: 1000mm wide to 3000mm wide

Length: coil(infinite length, conventional 100KG roll)

Colour

Conventional colors are translucent, highly transparent, and black. Other colors can be customized according to customers’ drawings such as (red, orange, yellow, green, blue, purple). Our company has colored card books, and there are more than 700 colors for customers to choose.

Application

Punching gaskets,

Gaskets

Seals

Sealing performance

For pharmaceutical,

Industrial and food industries

Suitable for environments with high pressure requirements

Silicone Rubber Sheet for Solar Laminator

Uses qualified raw material of a world-famous brand for the high tear-resistant silicon rubber sheet and carries out technical cooperation with professional companies domestically and abroad. CHUNHUAN adopts advanced techniques and special equipment, large drum-type vulcanization unit, in the development of the product, which has a high level of stability, a good evenness and reliability. Specially used for solar energy laminator, etc.

According to specific working conditions and lose-efficacy forms of solar laminated sheet, CHUNHUAN develops the second generation silicone rubber sheet. Based on the former silicone rubber sheet, this one brings in the green environment reinforcing material which is acid resistant, chemical resistant, high temperature resistant, so the tensile strength, tearing strength and dimensional stability of the silicone rubber sheet are greatly improved. Then the lifetime is longer. The advantage of the silicone rubber sheet is that even if it is used to the extreme, the solar module will not be damaged.

The third generation silicone rubber sheet has great improvement on the chemical resistant and aging resistant property, especially on the high resistance to the EVA volatile matter, then the lifetime can be longer.

The fourth products’ working surface uses fluorine silicone rubber, it has excellent acid-resistance, the corrosion caused by EVA volatile is almost zero, it has better temperature resistance, can meet the needs of high temperature curing process.

Our Service

1) Your Inquiry Will Be Replied Within 2 Hours During Working Time,Within 24hours When Rest Time.

2) Our Working Time Is 7.30 AM --17:30 PM,Monday To Saturday.

3) General Samples Time Can Be Arranged Within 2--5days.

4) Orders Will Be Produced Exactly As Request And Approved Samples.

5) When Mass Production,We Send Photos To Show The Production Line.And Confirm The Estimate Time Again.

6) At The End Of Mass Production,Photos And Samples Will Send To You For Approval.You Can Arrange The Inspection.

7) Before Shipment,Our QC Will Have Inspection To Make Sure The Quality.

8) We Always Try Best To Ensure Every Order To Delivery In Time.

Payment Terms

1) T/T,Cash,L/C.

2) 30% Deposit,70% Balance Before Shipment.

3) Lead Time: 15 Days After Received Deposited For 2tons.

4) Delivery Way: By Sea,By Air, By EMS,DHL,UPS,TNT,FedEx.

Packing & Delivery

For Sample: By EMS,DHL,UPS,TNT,FedEx

Around 5--7 Working Days To Arrive

For Bulk Order:

1. Qty Of 2tons,Within 15 Days.

2. Via Sea

3. Delivery Time:we Will Finish Production In 15days For 2tons.

4. For 20 GP,May Nee Around 30days.

Zhenjiang Chunhuan Sealing Materials Co., Ltd (Group) is located in Yangzhong City, Jiangsu Province, China, Founded in 1985, after more than 30 years of continuous development, has become the production of fluorine plastic products scale backbone enterprises. Companies registered capital of 80.88 million yuan, with more than 8,000 yuan in fixed assets, 20,000 square meters of business premises, more than 200 workers.

Main products: PTFE molded tube, sheet, gasket, PTFE push, extrusion rod/ tube,PTFE skived sheet/film,PTFE filled products,Soft PTFE products,PTFE processing parts,Steel lining pipe fittings; Engineering plastics and Various metal seals, Metal sprial wound gasket; Fluorine rubber products, Gaskets, O-ring, oil seal etc.