Add to Cart
Sterile Sanitary Stainless Steel Single Cartridge Filter Housing ss304 ss316 for Water Treatment
Feature
• Ultra high level of polishing, use 0.3um, the outer wall is
0.4um, absolute health level and polishing.
• Using strong fast loading, the highest pressure of 0.6 Mpa, 1.0
Mpa.
• Low exhaust valve and drain valve: threaded joint sets and pagoda
from, when deflated and drainage, with the connect lose won't turn.
• Low filter supporting feet by strengthening thread, not easy
sliding teeth, more durable; Can be installed adjusting nut at the
bottom of the feet, can adjust the height of the filter, easy to
use.
Operating Conditions | |
Max. operating pressure | 0.6MPa 1.0MPa |
Max. operating temperture | 150℃ |
Disinfect | Online or steam sterilization: 121℃/30min |
Material | |
Shell | 304, 316L |
Eyebolt | 304 |
Stabilizer blade | 304 |
O-ring | EPDM, PTFE Viton, Silicone |
Connection | |
Connection of shell | Tri-clamp |
N1, N2 In- outlet | Tri-clamp |
N3 Pressure gauge(option) | |
1.5″Tri-clamp | |
N4vent valve(option) | M6 Thread |
N5 Drain valve (option) | M6 Thread |
Cartridges connection | 222 type, 226 type |
Surface Finish | |
Finish type | Mechanical / electrolytic polishing, sand blasting |
Polishing precision | 0.3um Inner surface Ra≤0.3um |
0.4um Outside surface Ra≤0.4um |
Different stainless steel multi-cartridges filter housing are
customized, as long as you offer us picture and drawing.
Any request will be respond within 20 hours.