Add to Cart
high precision customized advanced industrial ceramics zirconia
parts ZrO2
Zirconia Ceramic material is characterized by high hardness, insulation, wear resistant, high
temperature resistant and thermal shock resistant. And all kinds of
customized ceramic substrate are available in customized
requirement.
Key Properties:
• Use temperatures up to 2400°C
• Low thermal conductivity
• High density
• Chemical inertness
• Resistance to molten metals
• Wear resistance
• High fracture toughness
Typical Uses
• Precision ball valve balls and seats
• Deep well down-hole valves and seats
• Rollers and guides for metal tube forming
• Hot metal extrusion dies
• Marine pump seals and shaft guides
• Oxygen sensors
• Fuel cell membranes
Properties Sheet:
Properties | Units | 95 Alumina | 99 Alumina | Zirconia |
Density | ɡ / cm3 | 3.65 | 3.92 | 5.95 - 6.0 |
Water Absorption | % | 0 | 0 | 0 |
Coefficient of Thermal Expansion | 10-6 / K | 7.9 | 8.5 | 10.5 |
Modulus of Elasticity Young’s Mod | Gpa | 280 | 340 | 210 |
Poisson’s Ratio | / | 0.21 | 0.22 | 0.3 |
HV Hardness | Mpa | 1400 | 1650 | 1300 - 1365 |
Flexural Strength @ Room Temperature | Mpa | 280 | 310 | 950 |
Flexural Strength @ 700℃ | Mpa | 220 | 230 | 210 |
Compressive Strength@Room Temperature | Mpa | 2000 | 2200 | 2000 |
Fracture Toughness | Mpa * m½ | 3.8 | 4.2 | 10 |
Heat Conductivity @ Room Temperature | W / m * k | 18 - 25 | 26 - 30 | 2.0 - 2.2 |
Electrical Resistivity @ Room Temperature | Ω*mm2 / m | >1015 | >1016 | >1015 |
Max Application Temperature | ℃ | 1500 | 1750 | 1050 |
Resistance to Acid Alkaline | / | High | High | High |
Dielectric Constant | / | 9.5 | 9.8 | 26 |
Dielectric Strength | KV / mm | 16 | 22 | / |
Thermal Shock Resistance | Δ T ( ℃ ) | 220 | 180 - 200 | 282 - 350 |
Tensile Strength @ 25℃ | Mpa | 200 | 248 | 252 |
Product show
The other related products
Factory Introduction
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50%
T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Machine
Package and shipping
Insulators will be packed in a bubble bag individually, then
separated by a foam, finally put in standard export carton packing,
or OEM packing.
Shipped by Express ( DHL, TNT, UPS, Fedex, EMS ), Air, or Sea
transportation.
Welcome to contact for the quotation, 2D/3D drawing will be perfect
!