Add to Cart
programmable humidity and temperature tester
Standard Features
Main Technical Parameter
Model | T-100 | T-225 | T-500 | T-800 | T-1000 |
Internal dimension (mm) | 450*450*500 | 500*600*750 | 800*700*900 | 800*1000*1000 | 1000*1000*1000 |
Overall dimension (mm) | 1050*880*1440 | 1050*1020*2000 | 1320*1320*2170 | 1470*1520*2315 | 1670*1520*2315 |
Technical structure | |||||
Temperature range | -20℃ ~+150 ℃ | ||||
Low type | Ⅰ: -40℃ Ⅱ:-60℃ Ⅲ: -70℃ | ||||
Temperature fluctuations | ± 0.5 ℃ | ||||
Temperature deviation | ± 2.0 ℃ | ||||
Heating rate | 3 ℃ / min | ||||
Cooling rate | 1 ℃ / min | ||||
Control system | |||||
Controller | 5.7" programmable color display touch screen controller | ||||
Controller optional languages are English, German, French, Russian, Spanish, Korean, Japanese. | |||||
PC Link with software, R-232 interface | |||||
Temperature Sensor | PTR Platinum Resistance PT100Ω/MV A-class | ||||
Temperature Resolution | ± 0.001 ℃ | ||||
Heating system | Independent Nichrome electronic heating system | ||||
Cooling system | French TECUMSEH compressor | ||||
Circulatory system | Cold resistance and low noise centrifugal wind wheel | ||||
Material | |||||
Exterior material | Steel Plate with protective coating | ||||
Interior material | SUS304 stainless steel | ||||
Insulation window | Double thermostability silicone rubber sealing | ||||
Standard configuration | 1 Cable hole (Φ 50,) cover, 2 sets of shelf, 2 protector tubes, 1 overflow water tube,1 copy of operating specification | ||||
Timing Function | 0.1~999.9 (S,M,H) settable | ||||
Power Supply | AC220V/AC380V 50HZ Three-phase five little system | ||||
Ambient Temperature | 5℃~+30 ℃ ≤85% RH | ||||
Standard | IEC60068-2-1;IEC60068-2-2;GB/T2423.1-2001; GB/T2423.2-2001 |
Design and Construction
Test area
Test area is made of stainless-steel, the real wall of test area with
chip-type wind board and return air inlet to achieve air flow.
Left wall opened test hole (Φ 50mm, Φ125mm).
Test hole is stainless steel with silicone plug.
Temperature sensor installed on right wall.
Chamber with 2 stainless steel shelves which can be adjustable.
Temperature air flow
the real wall of test area with chip-type wind board and return air inlet
to achieve air flow.
Air flowing out from top of wind board which control air direction, and return
into air let to achieve air flow .
Control panel
Controller is located on right side of test chamber.
5.7" programmable color display touch screen controller from South Korea.
Controller language option: English, Russian, Spanish, Korean.
Programs reach to 999 groups and 999 sections
R-232 / R-485 interface, PC Link with software , LAN network interface
Touch screen control panel with color LCD display
Cooling system
Cooling unit is French TECUMSEH compressor.
Environment friendly Refrigerant R404A & R23
Single compressor for the -20℃ level
Double-Stage refrigerating unit the -40℃~-70℃ level.
Sensors
Temperature sensor PT-100 A class
Resolution: temperature: ± 0.01 ℃
Large viewing window
Heated viewing window with interior lighting, preventing frosting.
Viewing window size is 25*30cm
(T-225, T-500 ,T-800 ,T-1000 30*35),
if you require bigger window, confirm in advance .
Safety protection
Independent over-temperature protection,
Over-current protection
Refrigerant high-pressure protection switch
Earth leakage protection and so on
Power supply and Wiring
380V, 50 Hz 10% +/- three-phase-five-wire system
Package with Export Standard Wooden Box
Can be used for Sea, Air,Railway, Truck transportation.
Installation
Environment conditions
Temperature:5 ℃ --35 ℃ , Relative humidity: ≤85%, pressure: 86kPa—106 Kpa
Space conditions
Chamber shall be installed on flat floor, with good ventilation
No combustible material, explosive material or strong vibration around.
No direct sunlight or other heat sources direct radiation.
No strong airflow around.
No strong electric field around.
Warranty & service
Warranty period: 3 years
Service:
Our company will repair the product, if the product, the material of the parts, the design and manufacturing of the products made by our company arise hardware problems caused by product itself rather than human error within three years warranty period since the date of delivery. |
Firstly, we can provide the spare parts with you. And also provide the solution about the trouble of the products. |
Secondly, Please send back the apparatus, which will be repaired by our company. |
Lastly, we would like to appoint our technical engineer to your company to repair the apparatus. |
Contact us:
Ms.Wendy
Company Name: Xian LIB Environmental Simulation Industry
Add: No.5 Zhangba First St, Xian High-Tech Area, Shaanxi Province P.R.hna 710065
Tel: +86 (0)29 68918976
Email: Wendy@ lib-industry.com ;
Skype: wendy.lib