A worm gear is a spiral thread simial to a thread on a bolt. The
worm gear engages a bevel gear, as the worm gear turns its threads
push the teeth of the bevel gear cauing the bevel gear to rotate.
The thread angle is such that only the worm gear may be truned to
drive th larger gear. If the larger gear is attempted to be turned
the teeth of teh bevel gear just jame against the worm gear keeping
the larger gear locked in position. This means that a worm gear
only lets power flow in one direction from the worm to the gear but
not the other way around.
|Material||S45C, SUS303, FC200,CAC702, SCM440, Polyacetal, Brass, Plastic etc.
,Acetal/Delrin,Alloy, Brass, Bronze, Carbon Steel, Ductile Iron,
Gray Cast Iron, Nylon, Plastic, Phenolic, Polycarbonate, Polyester,
Stainless Steel etc.|
|Accuracy||DIN Class 6, ISO/GB Class 6, AGMA Class 13, JIS Class 2|
|Standard||DIN, ISO/GB, AGMA, JIS|
|Heat treatment||Quenching and tempering, gear teeth induction quenching, nitriding,
|Application||automotive, electronics, textiles, printing, packaging, medical
equipment, food processing ,wind power, chemical, and pneumatics|
Capabilities of Worm Gears
|Pressure Angle||14.5°, 20° or as required.|
|No. of threads or reduction ratio||Single thread~Triple thread||10~60|
|Material||S45C, SUS303, FC200,CAC702, SCM440, Polyacetal, Brass, Plastic etc.|
|Heat treatment||Thermal refined, gear teeth induction hardened|
|Tooth surface finish||Milling, Ground||Hobbing|
Shenzhen Taixin Precision Co., Ltd.
Add: No.284, Dongfang Road, Songgang Town,
Bao’an District,Shenzhen City,China.
Tel: +86-755-33073872 Phone: +86 13725598603