登录 | 免费注册 | 提交网站 | 免费看询盘 | 外贸旺站免费建站 | "贸易通"多语言推广 | 外贸论坛
Hot Products:
Home > Internet Service >

ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester

ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester

Brand Name: SKYLINE
Certification: EN71 Sharp Edge Tester
Model Number: SL-S12
Minimum Order Quantity: 1
Delivery Time: 10 days
Payment Terms: TT,paypal,
Skyline Instruments Co.,LTD
Site Member
Guangdong China
Business type: Manufacturer Distributor/Wholesaler Importer Exporter Seller
3/F 2nd Building Minghui Industrial Zhongwuwei Niushan Dongcheng District Donggua,Guangdong 523128 China
Supplier`s last login times: within 31 hours

1.35LB Fixed Force Sharp Edge Tester ISO 8124-1 , Children Products / Toys Safety Test Equipment


Application

Used to determine whether the edge of a toy or item is a sharp edge with an unreasonable risk of injury.


Product information
To determine whether accessible edges on toys are likely to cause injury. A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.


Test principle

The steel shaft used to simulate children's fingers needs to be hardened. The surface Rockwell hardness should be no less than 40, the surface roughness should not be greater than 0.40 microns, and the diameter should be 9.35 mm ± 0.12 mm. A layer of simulated artificial skin tape was applied perpendicularly to a steel shaft wrapped with simulated artificial skin glue with a force of 6 N (1.35 lb). The steel shaft was constant tangent at 23 mm/sec ± 4 mm/sec. The speed is rotated for one week. Check the edge of the test to cut (cut) the simulated artificial skin adhesive paper. If cut (cut), the tested edge is defined as a potentially dangerous sharp edge.


Sharp edge tester usage and judgment results
1. Attach the PTFE adhesive tape to the mandrel as required, and then rotate the mandrel along the tested accessible edge by 360°. Check that the test adhesive tape is gravity-corrected.
Whether the ball can pass the test template completely. The length of the cut. Calculate the percentage of the length of the cut tape. Judgment: If the adhesive tape is cut by 50%
Split, the edge is considered to be a sharp edge.
2. The edge to be tested shall be the accessible edge determined after the accessibility test of the toy part or component.
3. If the touchable edge of the toy as a whole cannot be tested, in the case of simulating the toy as a whole, the accessible edge can be removed and tested separately.
4. The key to the sharp edge test is how to fix the detected edge and ensure that the mandrel is at right angles to the edge, and there is no phase between the mandrel and the edge during the test.
For sports.
5. During the rotation of the mandrel, it should be ensured that the pressure applied to the mandrel is continuously stable.


Specification

Size
(L*W*H)29*19*10cm
Weight
3.5Kg
Speed
1.00±0.08 In/s
Fixed force
1.35LB
Material
stainless steel

Accessories

Tiefo Long Tape PTFE Tape A set of foot switches, a power charger, an operating manual
Standard
ASTM F963 4.7, EN 71-1 8.11, 16 CFR 1500.49, ISO 8124-1 5.8

Technical Parameters
1.Diameter of rotary mandrel shown in table 1:

StandardEN71-1ASTM F 963/16CFR1500.49
Nominal valueφ(9.53±0.12)mmφ(0.375±0.005)inch
Measured valueφ9.450mmφ0.3720 inch


2.Measured value of force shown in table 2:

StandardEN71-1ASTM F 963/16CFR1500.49
Nominal value(6±0.5)N1.35 lbf
Measured value6.00N1.35 lbf


3.Rotate speed of rotary mandrel shown in table 3:

StandardEN71-1ASTM F 963/16CFR1500.49
Nominal value(23±4)mm/s(1.00±0.08)inch/s
Measured value19.3mm/s0.760inch/s


4.Roughness of rotary mandrel shown in table 4:

StandardEN71-1ASTM F 963/CFR150.49
Nominal value≤0.4 μm≤16 micro inch
Measured value0.15 μm5.9 micro inch

Please review video of the Sharp Edge Tester operation as below link:

https://youtu.be/dQZQHH2peHM



ISO 8124-1 Lab Testing Equipment 1.35LB Sharp Edge Tester,Children Products / Toys Safety Test Equipment


ISO 8124-1 Lab Testing Equipment 1.35LB Sharp Edge Tester,Children Products / Toys Safety Test Equipment


Accessories

ISO 8124-1 Lab Testing Equipment 1.35LB Sharp Edge Tester,Children Products / Toys Safety Test Equipment



Product Tags:

iron on edging tape

      

edge tape for cabinets

      

pull-off adhesion tester

      

ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester Images

Send your message to this supplier
From:
Enter your email please.
To: Skyline Instruments Co.,LTD
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Other about

ISO 8124-1 Toys Safety Testing Equipment 1.35Lb Fixed Force Sharp Edge Tester

Staircase for Tumble test for Wheeled Toys

Brand Name :SKYLINE
Certification :Tumble test for Wheeled Toys

SL-S47 Flat Clamp

Brand Name :SKYLINE
Model Number :SL-S47

ASTM / EN71 Toy Testing Equipment Sharp Point Tester

Brand Name :SKYLINE
Certification :Sharp Point Tester

Hot Selling Bite Test Clamp

Brand Name :SKYLINE
Certification :Bite Test Clamp

Manufacturer and exporter of ISO8124 / EN71 Sharp Edge Tester

Brand Name :SKYLINE
Certification :EN71 Sharp Edge Tester

Precision Gauss Meter

Brand Name :SKYLINE
Certification :Gauss Meter