Add to Cart
BX Type Mural Jib Crane with chain hoist
Brief introduction of Mural Jib Crane
BX Jib Crane is a new generation of the hoist equipment developed to meet the requirement of modernized production.
This machine suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to liftand materials handling.
It's fixed on the floor and it could stand independently. And the arm fixed on the top of fixed pillar. If the arm needs swing,
the swing motor will be equipped on crane! And then the electrical will be installed on the crane as per actual demands.
Contrlo method of Wall Pillar Arm Crane
Pendent line with press button or remote control or both.
Application of Wall Pillar Arm Crane
widely, such as dock, warehouse, workshop etc
Environment of Wall Pillar Arm Crane
1). Power source is three-phase alternating current, rated
frequency is50HZ, rated voltage is 380v.
2). the altitude height of site is ought to be less than 2000m
3). Flammable explosive and corrosive gas are forbidden in the work
environment
4). The crane is forbid to lift molten metal, explosives, poison
and corrosives
Feature of Wall Pillar Arm Crane
Quick and easy installation
Poured foundations can take up to a week to cure before
You can install the jib
Now there’s no waiting
Flexible for easy relocation
It’s easy to relocate a jib where there’s no poured foundation.
That means more flexibility in choosing initial jib location.
You can place it closer to machines or other obstructions, because
There is no need for a large square foot area for a concrete pour.
Safety feature of Wall Pillar Arm Crane
Weight overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system, Current overload protection system and so on!
Girder of Wall Pillar Arm Crane
The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and
horizontal rigidity and small wheel loads being transmitted to the crane runway!
Design and construction rules of Wall Pillar Arm Crane
All the standards which are required for the crane are the International standard and Chinese standard.
Painting of Wall Pillar Arm Crane
Primer and finishing paint
Color: according to your demand.
Average thickness: about 100 microns.
Parameter of Mural Jib Crane
Rated Capacity | t | 0.25 | 0.5 | 1 | 2 | 3 | 5 | |
Beam length | mm | 2000~6000 | ||||||
Lifting height | mm | 2000~6000 | ||||||
Lifting speed | m/min | 8; 8/0.8 | ||||||
Travelling speed | m/min | 10; 20 | ||||||
Turning speed | r/min | 0.76 | 0.69 | 0.6 |