SK6812RGBY LED Chip
SPECIFICATION
INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL OF
CHIP-ON-TOP SMD TYPE LED
Document No.: SPC/SK6812RGBY
Model No.: SK6812RGBY
Description: 5.5*5.0*1.6mm Top SMD Type 0.25 Watt Power
integrated light source Intelligent control LED
SK6812 RGBY: The default is the chips with IC integration
R: RED 620-630NM
G: GREEN 515-525 NM
B: BLUE 460-470 NM
Y: YELLOW 590-595 NM
General Description
SK6812RGBY is a smart LED control circuit and light emitting
circuit in one controlled LED source, which has the shape of a 5050
LED chip. Each lighting element is a pixel, and the intensities of
the pixels are contained within the intelligent digital interface
input. The output is driven by patented PWM technology, which
effectively guarantees high consistency of the color of the pixels.
The control circuit consists of a signal shaping amplification
circuit, a built-in constant current circuit, and a high precision
RC oscillator.
The data protocol being used is unipolar NRZ communication mode.
The 32-bit data is transmitted from the controller to DIN of the
first element, and if it is accepted it is extracted pixel to
pixel. After an internal data latch, the remaining data is passed
through the internal amplification circuit and sent out on the DO
port to the remaining pixels. The pixel is reset after the end of
DIN. Using automatic shaping forwarding technology makes the number
of cascaded pixels without signal transmission only limited by
signal transmission speed.
The LED has a low driving voltage (which allows for environmental
protection and energy saving), high brightness, scattering angle,
good consistency, low power, and long life. The control circuit is
integrated in the LED above.
2. Main Application Field:
● Full color LED string light, LED full color module, LED super
hard and soft lights, LED guardrail tube,
LED appearance - scene lighting
● LED point light, LED pixel screen, LED shaped screen, a variety
of electronic products, electrical equipment etc..
3. Description:
● Top SMD internal integrated high quality external control line
serial cascade constant current IC;
● control circuit and the chip in SMD 5050 components, to form a
complete control of pixel, color mixing uniformity and consistency;
●built-in data shaping circuit, a pixel signal is received after
wave shaping and output waveform distortion will not guarantee a
line;
●The built-in power on reset and reset circuit, the power does not
work; ●gray level adjusting circuit (256 level gray scale
adjustable);
● red drive special treatment, color balance;
● line data transmission;
● plastic forward strengthening technology, the transmission
distance between two points over 10M;
● Using a typical data transmission frequency of 800 Kbps, when the
refresh rate of 30 frames per sec