Add to Cart
ADVANTAGES
PDC anchor shank drill bits
Type | D(mm) | H(mm) | Wing Quantity | PDC cutter | Waterpore | ||
Shape | Quantity | Quantity | D(mm) | ||||
MG28A | 28 | 48 | 2 | half | 2 | 1 | 5 |
MG28B | 28 | 48 | 2 | whole | 2 | 1 | 5 |
MG28C | 28 | 48 | 3 | half | 3 | 1 | 5 |
MG30A | 30 | 48 | 2 | half | 2 | 1 | 5 |
MG30B | 30 | 48 | 2 | whole | 2 | 1 | 5 |
MG32A | 32 | 48 | 2 | half | 2 | 1 | 5 |
MG32B | 32 | 48 | 2 | whole | 2 | 1 | 5 |
MG42 | 42 | 60 | 2 | Half+whole | 2+2 | 1 | 5 |
Note: We also can produce and design as per clients’ drawings/samples/requirements
FEATURE
1. Increased wear resistance and toughness.
2. Boosts production rates by reducing change over.
3. Fast penetrating two wing drill bit for wet drilling with centre flushing.
4. PDC drill bits feature cutters made of polycrystalline diamond layer sintered with tungsten carbide subtsrate.
PDC anchor bit/PDC/PCD roof bit/ roof anchor bolt
PDC anchor shank drill bits are mainly used for the coal seam, dam
and roadway construction of bolt-mesh support. Their life are 10-30
times of tungsten carbide bits. Usually the anchor shank drill bits
have 2 or 3 wings.
LD adopt high quality PDC cutters and advanced brazing technology,
so the anchor shank drill bits have high impact resistance and
stable performance, can be applied to rock formation of f below
14,like gravel, granite, limestone, etc.
Type D(mm) H(mm) Wing Quantity PDC cutter Waterpore
1.We are the leading manufacture of PDC(Polycrystalline Diamond Compact) bit
2.Mainly used for the bolt-mesh support for coal mine, dam and roadway construction.
3. High wear resistance and toughness
4.10-30 times life of tungsten carbide alloy bit, high drilling efficiency
5.ISO9001:2000 certificated
6.Diameter:25-28mm,32,42mm
7.Wings:2,3
8.Thread Size:M14*1.5, M12*2,M16*1.5 ,M16*
Note: We also can produce and design as per clients' drawings/samples/requirements
.