HDMI Over Single Fiber Optical Extender with RS232
HDMI hd video switching network transmission system can compress
and convert DVD/PC/PS3 players's full 1080p
hd video signal to online data, so that it can be realized through
the optic fiber transmission. With the traditional analog
video extension project is different, the high-definition video
signal using MJPEG format
compression, and be converted to TCP/IP protocol standard network
data flow, so that the video signal is sent to the LAN
can in any area, it is a real way realize hd signal transmission in
local area network (LAN). This product can be widely
used in security monitoring, building big screen, mall advertising,
digital signage, visual media, teaching, digital KVM and
other fields.
II. Features
1. Support HDMI 1.3 protocol, compatible with DVI mode.
2. Support all video resolution between 640x480 and 1080p.
3. Using the MJPEG format of the video codec, reduce the
transmission bandwidth, guarantee the video playing fluency, short
time delay .
4. Support infrared remote control signal transmission.
5. Support serial bus convert to network transmission, remote
control equipment.
6. Using TCP/IP network protocol standard, far transmission
distance, strong anti-interference ability, available network
switch cascade and expansion.
7. Support point-to-point mode, one point-to-many mode and cascade
connection mode.
8. High integration scheme, compact products, Compatible with the
video input and output equipment, plug-and-play.
III. Specification
Video Codec
| M-JPEG
| The 1080 video signal compression to about 50Mb/s, screen clear and
smooth, bright in colour. Resolution and refresh rate is small, the data flow is small.
|
Video Interface
| HDMI
| Support HDMI 1.1/ 1.2/ 1.3,HDCP1.1/ 1.2,compatible DVI.
|
Transport Protocol
| TCP/IP
| Standard TCP/IP protocol on the network equipment, good
compatibility, good transmission network expansion.
|
Transmission Delay
| 70ms
| Cable connected directly transmission delay within 70ms
|
Remote Control
| IR
| Support infrared remote control back-pass.
|
Serial Transmission
| UART
| Convert serial bus to network signal transmission, the transmission
distance is not restricted.
|
Video Resolution
| VESA
&
CEA-861
| 800x600, 1024x600, 1024x768, 1152x864,
1280x600, 1280x768, 1280x800, 1280x960, 1280x1024, 1360x768,
1440X1050, 1440x900, 1600x900, 1680x1050;
480i/p, 576i/p, 720p, 1080i/p etc.
|
Sound
| Digital Audio
| Audio sample rate: 32kHz, 44.1kHz, 48kHz.
|
Optic fiber transmission
| 20km
| Sptic fiber transmission, the direct transmission distance is 20
kilometers. For infinite cascade through the FC switch, the longest cascade distance is not restricted.
|
Operating Temperature/
Humidity
| degree / RH
| 0 ~ 70 degree / 10% ~ 80% RH
(no condensation)
|
Storage Temperature/
Humidity
| degree / RH
| -10 ~ 80 degree / 5% ~ 90% RH
(no condensation)
|
External Power Supply
| 5V/ 1A
| AC input: 100V - 240V (50 - 60Hz) DC output: 5V/1A
|
Power consumption (Max)
| TX / RX
| HDMI TX: 3W / HDMI RX: 3W
|
Size
| L x W x H
| 97.5×54.5×20mm
|
Weight
| g
| 140g
|
IV. Product Functions Interface
Number
| Describe
|
5
| DIP Switch 1
|
4
| DIP Switch 2
|
3
| DIP Switch 3
|
HDMI
| TX-2
| HDMI-IN: HDMI input interface.
|
RX-2
| HDMI-OUT: HDMI output interface.
|
IR
| TX-1
| Infrared remote control signal output.
|
RX-1
| Infrared remote control signal input.
|
LED
| 7
| Power light: After power on, the red on.
|
6
| Status light: System on->Bright, TX&RX connect->Flash
|
8
| The Optic fiver interface: Sender and Receiver are directly
connected, or connected to the same LAN switch machine.
|
9
| RS232 serial port information output.
|
10
| DC power intput port: 5V/1A.
|
RS232 Guidance
1 means on , 0 means off.
|
Band Rate
| 5 DIP switch 1
| 4 DIP switch 2
| 3 DIP switch 3
|
2400
| 0
| 0
| 0
|
4800
| 0
| 0
| 1
|
9600
| 0
| 1
| 0
|
19200
| |