Lip Channel Roll Forming Machine,Lip Channel Forming Machine

Lip Channel Roll Forming Machine:
Manual Decoiler
Feeding Guide
Roll Forming System
Hydraulic Cutting
Hydraulic Station
PLC Contol System
Run-out Table

Detailed Specifications of Lip Channel Roll Forming Machine:
Decoiler
Decoiler Type: Manual Decoiler
Weight Capacity Of Decoiler: 5 Ton

Levelling and Feeding Device
Rollers for levelling: 5 rollers
Feeding rollers: 2 groups feed rollers

Lip Channel Roll Forming Machine:
Roll Diameter: 70mm
Forming Roller stand: 16 stations;
Main Axis material: First grade 45# steel, heated and quenched
Roller material: GCr15 Steel, Quenched and heated process
Forming Speed: 8-14 m/min
Dive Type: 1.5" Chain of transmission
Machine Frame stand: Welded structural steel
Thickmess of Fame Steel: 18mm
Drive Motor: Famous Chinese Brand

Cutting Device & Hydraulic Station of Lip Channel Roll Forming Machine:
Cutting type: Hydraulic cutting
Hydraulic power: About 5.5 Kw
Hydraulic Blade and cutter material: Cr12 MOV, quenching process
Cutting length tolerance: +/- 2mm

Electrical Control System of Lip Channel Roll Forming Machine:
Voltage: 380V, 3 Phase 50Hz
Electrical control system: Japanese Panasonic PLC Board
Encoder Frequency Control System: Omron Brand
Touch Screen: Panasonic Brand
Transducer: ABB
Szie of PLC Control Board: 700mm(L) x300mm(W) x1000mm(H)
Ine
2.2 Roll Forming Machine
2.3 PLC Controlling Box
2.4 Hydraulic Station
2.5 Run-out Table

3. Main Technical Parameters of lip channel Roll Forming Machine:
3.1 Thickness of Material: 2.5mm Galvanized Steel Coil
3.2 Rolling Stations: 18 Stations
3.3 Diameter of Roller: Φ 80mm
3.4 Roller applied to Bearing Steel Quenched
3.5 Forming Speed: 6-10m/min
3.6 Transmission: L. 5" Chain Transmission
3.7 Motor Power: 15KW
3.8 Dimension: 13m X 1.5m X 1.3m
3.9 Electronic Controlling System: Panasonic PLC
3.10 Total Weight: 12 tons
3.11 Hydraulic Cutting
3.11.1 Hydraulic Station Power: 11kw
3.11.2 Hydraulic Pressure: 20Mpa
3.11.3 Hydraulic Blade Material: Cr 12
3.11.4 Cutting Length Error: ± 2mm
3.11.5 Punching Mould: Punching Head 4PCS

4. Quality Requirements for lip channel Roll Forming Machine:
4.1 Thickness of Chrome on Roller: 0.05mm
4.2 Productions According to National Standard: GB/Tl2755_91;
4.3 Production is plate and without scratch.