3.2V 23Ah Lithium Iron Phosphate Battery Pack With 2000 Long Cycle Life Time
Brand Name:Topband
Certification:CE/UN38.3/MSDS/UL
Model Number:TB-027070180C-Fe-23Ah
Minimum Order Quantity:1000pcs
Delivery Time:2~4weeks for samples; 4~6weeks for mass production
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Address:
Topband Industry Park,Tangtou Town,Bao'an District,Sheznzhen,China
Supplier`s last login times:
within 39 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
3.2V 23Ah Lithium Iron Phosphate Battery Pack With 2000 Long Cycle Life Time
1. LiFePO4 rechargeable battery cells 3.2V 23Ah Feature
- Good safety performance
- High power, maxiumu discharge current up to 10C
- Long cycle life time, ≥2000 cycles (100% DOD)
- Low self-discharge, less than 3% per month
- No Memory Effect
- No pollution during manufacture and usage.
2. LiFePO4 rechargeable battery cells 3.2V 23Ah Specification
| No. | item | standard | remark |
| 2.1 | Nominal Capacity | 23Ah | 25±5℃,1C discharge |
| 2.2 | Internal Impedance | ≤6mΩ | |
| 2.3 | Nominal Voltage | 3.2V | |
| 2.4 | Cell Weight | 650±20g | |
| 2.5 | End-of-charge Voltage | 3.65V | At CC mode |
| 2.6 | End-of-charge Current | 0.05C | At CC mode |
| 2.7 | End-of-discharge Voltage | 2.00V | |
| 2.8 | Standard Charge Method | 1C CC/CV | 25±5℃ |
| 2.9 | Max pulse Discharge Current | 5C | Continuous Discharge Time: 10 seconds |
| 2.10 | Cycle Life | ≥2000cycles | 1C Continuous Discharge:≥80% SOC (100% DOD) |
| 2.11 | Calendar lif | 8years | |
| 2.12 | Charging Temperature | 0～45℃ | |
| 2.13 | Discharging Temperature | -20～55℃ | |
| 2.14 | Storage Temperature | -10～30℃ | |
| 2.15 | Terminal torsion | ≤5.5N·m | Locknut is recommended |
| 2.16 | Apprearance | Without break, scratch, distortion, contamination, leakage and so on | |
3. LiFePO4 rechargeable battery cells 3.2V 23Ah Characteristics
4. LiFePO4 reachargeable battery cells 3.2V 23Ah dimension
5. Safety test
| No. | Item | Test Method | Criteria |
| 6.1 | Short- circuit Test | A cell is tested in accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h. | No fire, no explosion |
| 6.2 | Overcharge Test | A cell is tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h. | No fire, no explosion |
| 6.3 | Over discharge test | A cell is tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h. | No fire, no explosion, no leakage |
| 6.4 | Crush Test | A cell is tested in accordance with 3.2, and then is placed on the crush machine, the axis is parallel to the crush equiment, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h. | No fire, no explosion |
| 6.5 | Impact Test | A cell is tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed. | No fire, no explosion |
| 6.6 | Stick Test | a) A cell is tested in accordance with 3.2 b) use φ5mm～φ8mm high temperature resistance steel needle, with speed of 25±5mm/s, to go through the cell from vertical direction of pole plate, the penetrate position should be close to the geometric center of plate surface, the steel needle remains in the cell; | No fire, no explosion |
| 6.7 | Heating Test(130℃) | A cell is tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of 5℃ per minute to 130℃±3℃ and remain for 30 min. | No fire, no explosion |
6. Storage & Transportation
- Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
- Battery should be stayed in the ware house -20℃～35℃ where it’s dry, clean, shade, and well-ventilated.
- The battery should be stored in 50% SOC during transportation.
- The battery need to be charged every 6 months if out of use.
- Keep the battery against dropping, turning over and serious stacking during loading
7. Certification
3.2V 23Ah Lithium Iron Phosphate Battery Pack With 2000 Long Cycle Life Time
Inquiry Cart
0