Q235 poles manufacturersstreet light pole /Solar Power Energy Light pole

Material
Q235 high quality mild steel
Mounting Height
3-12M
Shape of Pole
Round conical; Octagonal conical; Straight square; Tubular stepped; Polygonal
Shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine
Brackets
Single or double brackets are in the shape and dimension as per customers requirement
Welding
Welding confirms with international welding standard of CWB
Base plate mounted
Base plate is square or round in shape with slotted holes for anchor bolt and dimension as per customers requirement
Ground mounted
The length buried underground as per customers requirement
Galvanizing
Hot dip galvanization with thickness of 80-100µm average

customized service or design service

Offered
1) Details

Material:Q235 Steel

Welding:
No crack, no leakage welding, no bite edge, weld smooth level off without the concavo-convex fluctuation or any welding defects.

Hot Dip Galvanizing Process:
Inside and outside surface anti-corrosion treatment by hot dipping acid. Zinc coating is more than 85 um thick, which is in accord with GB/T13912-92 standard. Designed life of pole is more than 30 years, and the galvanized surface is smooth and with the same color. Flake peeling hasn’t been seen after maul test.

Powder Coating Process:

Pure polyester plastic powder coating is stable, and with strong adhesion & strong ultraviolet ray resistance. Film thickness is more than 100 um and with strong adhesion. The surface is not peeling even with blade scratch (15 * 6 mm square). Surface is smooth and color and luster are identical.

Lifetime: >20 years

Color: (grey)or customized