Add to Cart
Numerical Control HW-308B Type Spiral Parallel Winding Machine Host
Material | S304 stainless steel |
Size | 3500 X 1800 X 1900 mm |
Cutting length | 1-4 m |
Production speed | 8-18m |
Thickness of winding paper tube | 1-12mm |
Gross weight | 3200 kg |
Voltage | Current state preparation voltage |
Packaging | Customed/Wooden box |
MOQ | 1 set |
Advantages:
1.Computer PLC control, with remote control port;
2. Multi point operation panel or digital remote control function,
the operation is very convenient.
3,.The paper pipe cutting machine adopts the circular knife to cut
actively, the cut is more stable and the performance is more
stable.
4.More than 80 function settings, arbitrary setting machine
operation situation.
5.Stainless steel, plastic pots, poly in mastic knife, high carbon
steel, durable rubber knife.
1. Wear the personal protective equipment properly. What should be worn must be worn, and what should not be worn must not be worn. For example, when the paper tube is machined, the female worker is required to wear a protective cap. If not, the hair may be stranded in. At the same time, gloves must not be worn. If worn, the rotating part of the paper tube machine may wring the gloves in and hurt the hands.
2. The paper tube machinery and equipment should also be inspected according to the regulations. Especially
Paper tube machine
Paper tube machine (4)
It is to fasten the object to see if it is loose due to vibration in order to re-fasten.
3, before the operation of paper tube mechanical equipment for safety inspection, and empty car running, confirm normal, can be put into operation.
4, equipment is strictly prohibited from running with faults, and must not be used together to prevent accidents.
5. When paper machine is in operation, it is strictly prohibited to adjust by hand, nor can parts be measured by hand or lubricated or cleaned up. If necessary, mechanical equipment should first be shut down.
6. The tools, fixture and parts used for paper tube mechanical equipment must be firmly fastened and not loose.
7, mechanical safety devices must be properly used according to regulations, and must not be removed or used.
8. When the paper machine is running, the operator must not leave the work place to prevent any problems from occurring.
9, after the end of the work, the switch should be closed, the cutting tools and the work pieces are withdrawn from the working position, and the work site is cleaned up, the parts, the jig and so on are arranged in order, and the hygiene of the mechanical equipment of the paper tube is cleaned.