Allen Bradley 1485C-P1BS200 1485C P1BS200 AB 1485CP1BS200

Allen Bradley 1485C-P1BS200 1485C P1BS200 AB 1485CP1BS200

Product Description:

The name of the tag will reflect the name you assigned the earlier. The "C" sub-group contains the contents of the configuration assembly, which is not currently used in the 1203-CN1. The "O" subgroup contains one entry for each word of output data you configured, and the "I" sub-group contains one entry

for each word of input data you configured. The "O" sub-group corresponds directly to output data for a PLC-5 described on page 5-2 of the 1203-CN1 user manual (i.e., for most common configurations, word 0 is the logic command, word 1 is the speed reference, words 2 and 3 are the first pair of data links, etc.).

The "I" sub-group is similar to the input data for a PLC-5, except that it is shifted by two words (i.e., word 2 is the logic status, word 3 is the speed feedback, etc.). Words 0 and 1 of the "I" sub-group represent network status data sent by the 1203-CN1 but not processed directly by the ControlLogix processor. At

this point, I/O between the ControlLogix processor and the 1203-CN1 should be configured and running, and the meaning of the various I/O words should be understood. If you need further assistance in configuring I/O, please contact technical support.

Contact Information:

Contact:Miya ( manager)

Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )

Related Product Recommendation:

The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image table is transferred between the programmable controller by the Remote I/O scanner, the same as with any

Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3. Important: Thecommunications module does not scale the data that is transferred. Consequently, all scaling of the

data must be done in the controller. Refer to the user manual for your SCANport product for details on
device units. Important: The Remote I/O to SCANport conversion is asynchronous. Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on

SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.

1747-L531/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/A SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/B SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/C SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/D SLC 5/03 SLC 5/03 Control Processor AB
1747-L532/E SLC 5/03 SLC 5/03 Control Processor AB
1747-L541/B SLC 5/04 SLC 5/04 Processor - Series B AB
1747-L541/C SLC 5/04 SLC 5/04 Processor - Series C AB
1747-L542/A SLC 5/04 1747-L542 Processor - Series A AB
1747-L542/B SLC 5/04 1747-L542 Processor - Series B AB
1747-L542/C SLC 5/04 1747-L542 Processor - Series C AB
1747-L543/B SLC 5/04 Processor - Series B AB
1747-L543/C SLC 5/04 Processor - Series C AB
1747-L551/A SLC 5/05 SLC 5/05 Controller AB
1747-L551/B SLC 5/05 SLC 5/05 Controller AB
1747-L551/C SLC 5/05 SLC 5/05 Controller AB
1747-L552/A SLC 5/05 1747-L552 Processor - Series A AB
1747-L552/B SLC 5/05 1747-L552 Processor - Series B AB
1747-L552/C SLC 5/05 1747-L552 Processor - Series C AB
1747-L553/A SLC 5/05 Controller AB
1747-L553/B SLC 5/05 Controller AB
1747-L553/C SLC 5/05 Controller AB
1747-M1 1 K EEPROM Memory Module AB
1747-M11 Flash Memory Module - 32K AB
1747-M12 Flash Memory Module - 64K AB
1747-M13 64 K Flash EPROM Memory Module AB
1747-M15 Adapter Socket AB
1747-M2 4 K EEPROM Memory Module AB
1747-M5 Adapter Socket AB

ADVANTECH PCI-1710 REV.C1-01-1 PCI MULTI-FUNCTION CARD

TROPOS NETWORKS 5210 MOTHERBOARD P/N 300049-01 REV.B2

IDEC Analog Programmable Logic Controller TYPE: FC4A-J8C1

VINTAGE Digital 3.0GB 5.25 FH Single SCSI HD - DSP5300S

CYCLADES ALTERPATH P/N 107-A KVM TERMINATOR KVM ADAPTER DB15M-RJ45-8 ,KB,Mouse

KAPAREL 8SLOT COMPACTPCI BACKPLANE MODEL PS4734-5

ARIEL MM-96 SBC (SINGUE BOARD COMPUTER)

DELL (POWEREDGE) SAS SATA HARD DISK TRAY P/N#CN-0F9541

ZNYX ZX346Q Quad Port 10/100 PCI Ethernet Adapter

Allied Telesyn Centrecom AT-3024SL

FAULHABER MINIMOTOR 2444 S 024 B K903 158762

TELECT P/N 005-0005-0002 X-AISLE 56 CKT 19X 1.75 BLK

EMACS MRG-6500P-R 500 WATT POWER SUPPLY

VIA EPIA MII 1000 - motherboard - mini ITX - VIA C3 - CLE266 - 1.0 GHz (pulled)

CPU PROCESSOR INTEL PENTIUM A80502120 SY033/SSS IPP

APEX PRECISION POWER - PA92 - IC, OP-AMP, 18MHZ, 50V/μs, SIP-12

Advantech PCI-6881 REV. A2

AMD-K5 PR133ABR CPU

HP PA-RISC CPU MODULE - p/n #: A2375-80025

Actiontec External Wireless USB Adapter (802.11b)

HAMILTON GASTIGHT SYRINGE FOR PRECISION MEASURING

Asus TUV4X - 533MHz FSB Socket 370 CPU

BARNSTEAD THERMOLYNE MODEL HPA1915B USED

CHELSIO 110-1064-21 A0

The use of the product:

1.tobacco,

Moore Automationare still working and able to shipping worldwide

Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you.
If you have any question pls do not hesitate to contact us.We can supply all kind of the automaiton parts,if you want to purchase parts pls send the parts model to my mail, I will prompt reply you asa I receive the
Hope anyone enquire from us.

it is a leading global supplier of control system components. We specialize in control systems and drives.
With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts.

We have tens of thousands of spare parts and spare parts warehouse . Products and services to serve for installing of users control system,
Distributed control systems, programmable controllers, panel controller and drive!

* Our mission is to help you!
* Reduced maintenance costs!

We have a large inventory of control system components. We also made a lot of new hardware and discontinued spare parts to help supporting your existing control systems.

We have experienced staff, extensive testing , all the spare parts which we sold are with warranty period of one year, and they have undergone rigorous testing and certification!