Flux Cored Welding Wire Machine Automatic Production Line PLC Control
Brand Name:Welding wire production equipment
Certification:ISO9001
Minimum Order Quantity:1500T/Y CO2 welding wire
Delivery Time:60days after receiving order and deposit
Payment Terms:T/T 30% deposit，70% rest payment before shipment
Place of Origin:JIANGSU CHINA
Contact Now
Add to Cart
Active Member
Address:
No.151 Shengang Road,Lingang street,Jiangyin city,Jiangsu,China
Supplier`s last login times:
within 23 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Flux cored welding wire and solid welding Wire Mesh Panel Welding Machine
Main machine of Welded Wire Mesh Machine
Wire dia:0.4mm-2.0mm
Mesh size:12.7mm-50.8mm
Welding width:91.4mm,1219.2mm,1524mm
Working power:380V
50-60HZ
Machine size:
2350×1820×1200mm
Weight: 2.5tons
Welding speed:110 radia
Specifications for your reference:
| Size of mesh (mm) | 6.35-12.7(1/4’’-2/1’’) |
| Width(mm) | 914.4-1219.2(12’’-48’’) |
| Diameter of wire(mm) | 0.45-1.07(BWG25-BWG19) |
| Max. rolled net size (mm) | 120m(400’’) |
| Welding speeding (mesh /minutes) | 75(radia) |
| Power | 380/220V |
| 50-60HZ | |
| 50KWAX4 | |
| Outside size (mm) | 2350x1820x1700 |
| Size of mesh (mm) | 6.35-12.7(1/4’’-2/1’’) |
| Width (mm) | 1219.2-1928.8(48’’-60’’) |
| Diameter of wire | 0.74-1.07(BWG22-BWG19) |
| Max. rolled net size (mm) | 120m(400’’) |
| Welding speeding (mesh /minutes) | 48(radia) |
| Power | 380/220V |
| 50-60HZ | |
| 50KWAX6 | |
| Outside size (mm) | 3050x1900x1750 |
Description:
Automatic production line for high speed wire welding is through the introduction of Swiss SCHLATTER company technology, after digestion, absorption, and research and development of a device, mainly composed of pay-off stand, wire frame, a longitudinal bar straightening device, longitudinal reinforcement traction device, storage rack, longitudinal reinforcement secondary straightening device, longitudinal reinforcement stepping feeding device, welding host, transverse reinforcement automatic feeding device, shearing machine, mesh network collection device, network transmission of orbit, it is mainly used for concrete road, building, tunnel, subway, water conservancy, such as prefabricated steel fabric in the construction field. This product production efficiency is high, the annual output can reach 50000 tons.
Features:
1. At present, a lot of other domestic products applicable to weld straight bar steel, need to manually wear reinforcement, the intensity of labor is big, the production efficiency is low. This project product is suitable for the plate steel, which can realize continuous welded steel fabric, improved the production efficiency.
2. Adopts two-way 45 ° inclined type straightening machine, straightening effect is good, all straightening roller can be adjusted through a hand wheel, convenient adjustment.
3. Longitudinal reinforcement stepping feeding device is convenient to adjust the longitudinal spacing, suitable for welding for a variety of specifications of the mesh. (patented)
4. Welding host selection for double impact cylinder, cylinder made by the company independent research and development, welding frequency up to 120 times/min, greatly improving the welding efficiency.
5. The transverse reinforcement automatic feeding system, without manual, the system consists of PLC program control, which can realize the continuity of transverse reinforcement accurate feeding.
6. Finished product mesh collecting device is composed of shrinkage, mechanical hand, lift orbits, which can realize the automatic mesh pallet, placed neatly, high production efficiency.
Welding Wire machine parameter
1. Wire material surface pre-treatment
1.1 high shelf pay-off:Put a wire rod, without motor
1.2 Scribble and automatic stop switch: wire out
of the pay-off machine through the steel ring with
a diameter of 200 mm, if a few circle wire
entwined, steel ring that was taken to the other
side, t the bottom of the stroke switch will send
signals, and the entire line emergency stop.
1.3 Repeated bending mechanical shell and
wire ball strong scrubbing device: the wire rod
at least six direction perpendicular(National
initiative)Bending heat treatment to strip iron
oxide on the surface of the wire.
Eight peeling wheel,
material: ZG45 steel, hardness of HRC50, Wheel
inner diameter Ф 115 --- Ф 120mm.
Wheel service life of 6000 hours. After
peeling ,the wire through period of tapered hole, use wire clean ball strongly wipe the
surface of wire rod, and does not damage
the wire surface, reduce the waste into the electrolytic pickling tank, ensure the
effect of pickling, facilitate drawing; By pressure cold water irrigation and block and
impurities, rust on the surface of the wire rod export high-pressure gas blowing
device, reduce by wire out of the water.
automatic welded wire mesh machine factory
- the wire diameter:1.5-2.5mm or 2.5-6mm
- the hole size:20mm(min)
- plc control full automatic
- roll mesh or sheet mesh all is ok
Flux Cored Welding Wire Machine Automatic Production Line PLC Control
Inquiry Cart
0