46 / 4D / 48 Adapter Plus for SKP-900 Auto Key Programmer for
Toyota
46 / 4D / 48 Adapter Plus Product Functions:
1. READ
This function is used to identify the chip type, chip ID, empty and
locked. Supported chip models are T5, PCF7935, PCF7936(hitag2),
PCF7941, pcf7942, pcf7943, PCF7946, PCF7952, PCF7953,
PCF7938(HITAG3), NXP2951, DST40, DST40+, and some smart keys after
2014. Supported types are ID13, ID33, ID40, ID41, ID42, ID44, ID45,
ID46, ID48, ID60, ID61, ID62, ID63, ID64, ID65, ID66, ID67, ID68,
ID70, ID8E, and so on.
2. WRITE
Connect to PC and edit chips, write special position for chips by
using PC software.
3. KEYMAKER
This method is used when all key lost, or the key programmer cannot
communicate with the car:
a. Read the immobox or the EEPROM in the ECU first. Note: some
car's EEPROM stored in ECU, you need buy other tool to read it
b. Then import the data to the PC software. Note: at same time,
connect the adapter with the PC, open the corresponding software,
import data correctly, the software will display the number and
location of keys used in this car, then please select the empty key
position, place the chip according to the software tips, press
Create button, later you will be prompted to save the data, this
data will be written back to EEPROM and replace the old data
c. Now you can start your car using the created chip. If the
software prompts chip generating unsuccessful, please change chip
and try again.
4. IMAGE
This function is used to create special chips. When you do key
programming by SKP-900, the system need special chip for some car
models, such as Mitsubishi 46 (Duplex communications chips). This
function can create special chips using common empty chips. If you
want creat TP series chip, please connect the adapter to the PC and
create special chips using the chip reading and writing tool.
5. UNLOCKER
This function is used to unlock some locked chips so that it can be
used again. Also including the initialization function for the
copyable chips.
6. COPY
This is the chip copy function. This function is used for decoding
the original chip and then copy it. After successful copy, the key
can start the car.
Take Toyota 67 Chip As Example:
a. Place the chip into the coil.
b. Select 4D copy function.
c. Select 1. Decoding: Generally about 30 seconds to decode is
successful, longest no more than 4 minutes.
d. Then enter the second step. Remove the original chip, place the
copyable 4D chip (for copyable 4D-EH2 chip, please unlock it
first), press YES button on the main unit, then the new chip
created, which can start the car just like the original one.
Packing List:
1pc x 46/4D/48 Adapter Plus for SKP-900 Key Programmer
1pc x COM Cable
2pcs x Adaptor