Home /Hardware Stock /

900Mhz High Speed Long Range Wireless Transceiver 1 Watt RS-232 / RS485 Data Radio

900Mhz High Speed Long Range Wireless Transceiver 1 Watt RS-232 / RS485 Data Radio

Brand Name:Kimpok
Certification:CE/FCC
Model Number:KP-RM104
Minimum Order Quantity:1 set
Delivery Time:3-7 days
Payment Terms:T/T, Western Union,PayPal
Contact Now

Add to Cart

Site Member
Location: Shenzhen Guangdong China
Address: Rm1310, Shangyou Residence, Gongye Rd., Longhua district, Shenzhen, 518000 China
Supplier`s last login times: within 48 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

900Mhz High Speed Radio Data Modem 1 Watt RS-232 / RS485 Data Radio


Description:


The XTend RF Module was engineered to provide customers with an easy-to-use RF solution that provides reliable delivery of critical data between remote devices. The module transfers a standard asynchronous serial data stream, operates within the ISM 900 MHz frequency band and sustains up to 115.2 Kbps data throughput.


Key Features:


Advance Networking & Security


True Peer-to-Peer (no Master device required),Point-to-Point, Point-to-Multipoint & Multidrop

FHSS (Frequency hopping spread spectrum).10hopping channels,each with over 65,000 unique network addresses available


AES Encryption:


performed using a FIPS197 certified implementation on a Phillips LPC microcontroller

128-bit AES for international variant.


Low power consumption:


2.8 - 5.5 V Supply Voltage.

Pin,serial port and Cyclic

Software sleep modes supported

Shutdown pin enables hardware sleep mode,that draws only 5 µA(typical)


Easy-to-use:

  • No configuration necessary for out-of box RF communications
  • Free X-CTU software (Testing and configuration software)
  • RF modules easily configured using,standard AT & binary commands
  • Transparent Operation (wireless links replace serial wires)
  • API Operation (Frame-based communications)
  • Portable
  • (small form-factor easily designed into a wide range of data systems)
  • Software - selectable I/O interfacing rates
  • Multiple data formats supported (parity,stard and stop bits,etc.)
  • XII™ Interference Immunity
  • No Master/Slave setup dependencies

Specifications:


Performance

Transmit power output

(software selectable using PL command)

@9600bpsthroughput data rate

1mW-1Watt

@115200bps throughput

data rate

1mW-1Watt


Throughput Data Rate

(software selectable using BR command)

9,600bps115,200bps
Receiver sensitivity

10,000bps -110dBm

115,200bps -100dBm

Power requirement
Receive current80mA
Shutdown mode power down

5 µA typical

Pin Sleep Power Down147 µA
Networking&security
Frequency

902-928 MHz, 915-928 MHz International variant

Spread spectrumFHSS (Frequency Hopping Spread Spectrum)456
Modulation

FSK (Frequency Shift Keying)

Supported Network Topologies

Channel Capacity

Peer-to-Peer (“Master/Slave” relationship not required), Point-to-Point, Point-to-Multipoint, Mesh

10 hop sequences share 50 frequencies

Encryption

256-bit or 128-bit AES Encryption - Refer to the KY Command [p29] to implement

Physical Properties
RF module board size1.44” x 2.38” x 0.20” (3.65 cm x 6.05 cm x 0.51 cm)
Weight0.64 oz. (18 g)

Connector

9-pin
Operating Temperature-40 to 85º C (industrial)
Antenna
Connector OptionsRPSMA (Reverse-polarity SMA) or MMCX
Impedance50 ohms unbalanced

Pin Signal Descriptions:

(Low‐asserted signals distinguished with a horizontal line over signal name.)


Interface Definition

(Face up, from left to right)

Pin number

1--
2RXDATA receive
3TXDATA transmit
4--
5GNDSignal ground
6--
7--
8--
9--

Package:


1* Module

1* RS-232data cable

1* power line

1* small antenna


Optional accessories:


RS-232 programming cable. (For user get through the computer's RS232 interface module parameter settings)

USB interface programming join line. (for user get through the computer's USB interface module parameter settings)

the data transmission test equipment. (User-friendly in the selection or the actual use of the module testing)

optional antenna. (The user can follow according to their actual situation to choose their own antenna,so that achieve the best results)


Remark:


1, in order to achieve the best communication results, try to use a smaller power supply ripple factor, the maximum current power supply module should be greater than 1.5 times of the maximum current.

2, TTL, RS-485, RS-232 three interfaces can only choose one.

3, the transfer rates are divided into: the number of interfaces rate: users can be changed by KYLPRO.exe PC software;


China 900Mhz High Speed Long Range Wireless Transceiver 1 Watt RS-232 / RS485 Data Radio supplier

900Mhz High Speed Long Range Wireless Transceiver 1 Watt RS-232 / RS485 Data Radio

Inquiry Cart 0