Home /

STS Prepaid Keypad Single Phase Electric Meter Active / Reactive Energy Measurement

STS Prepaid Keypad Single Phase Electric Meter Active / Reactive Energy Measurement

Brand Name:Radarking
Certification:IS09001; IS014001; IEC62052-11; IEC62053-21; IEC62055-31
Model Number:DDSY150 SSK
Minimum Order Quantity:1pcs
Delivery Time:20-40 working days
Payment Terms:Western Union, L/C, T/T
Contact Now

Add to Cart

Verified Supplier
Location: Wuhan Hubei China
Address: No.270, Huangjinkou 3rd Village, Hanyang District, Wuhan City, Hubei Province, China
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

STS Prepaid Single Phase Electric Meter Keypad Prepayment Meter for Indonesia Market


Description:

Keypad prepayment energy meter is a keypad-base stand-alone or split prepayment energy meter is a compact British Standard(BS) or DIN housing. The meter is capable of connecting with a remote User Interface Unit through PLC or 2-wire cable.


Electrical parameters:

Electrical parameters:
Voltage
Nominal voltage Un230V
Extended operating voltage range80%~115%Un
Limited voltage70%~120%Un
Frequency
Nominal frequency fn60Hz
tolerance5%
Current
Basic current(Ib)5A
Maximum current(Imax)80A
Starting current(Ist)20mA
Active energy constant1600imp/kWh
Measurement Accuracy
Active energy to IEC6205321Class1.0
Reactive energy to IEC6205323Class2.0
Power Consumption
Power consumption in Voltage circuit<2W <8VA
Power consumption in current circuit<1VA
Temperature range
Operation meter25ºC to+70ºC
Storage40ºC to+85ºC
Insulation strength
AC Insulation strength4kV at 50Hz during 1min
Impulse voltage 1.2/50 μs mains connections8kV

Main Features

1. Energy Measurement

Total and time-sharing forward active & reactive energy measurement
Total and time-sharing reverse active & reactive energy measurement
Save last one to sixteen months energy data


2. 20 digit Standard Transfer Specification(STS)

Credit data transfered from a point of sale (POS) or vending system is made into a numeric token in a 20 digit number using the Standard Transfer Specification (STS) encryption techniques, which comply with IEC62055 protocol


3. Load control function

When the residual energy is 0 or the allowable overdraft that both sides agreed, this meter will send out power-off signal to have load switch cut off power. The power will be recovered automatically after inputting new purchased energy amount.


4. Programmable low credit warning

The meter can be programmed for setting user credit warning threshold, When the meter's residual energyis equal to credit warning threshold, the meter will start the audio & video warning function in a way of warning light flashing


5. Tamper detection

With event recording function (including cover-opening event, tamper event and power failure event)


6. Optical port interface

Communication standards DL/T645-2007, 1200bps for communication
Support IEC62056-21 protocol


7. RS-485 serial interface

Communication standards DL/T645-2007, 2400bps for communication
Support IEC62056(DLMS/COSEM) protocol


8. LCD display

Number of digits value field Up to 8
Digit size 4x10mm

Technical parameters:

Insulation strength
AC Insulation strength4kV at 50Hz during 1min
Impulse voltage 1.2/50 μs mains connections8kV
Electro Magnetic Compatibility
Electrostatic discharges
Contact discharge8kV
Air discharge16kV
Electromagnetic RFfields
27MHz to 500MHz typical10V/m
100kHz to 1GHz typical30V/m
Fast transient burst test4kV
Mechanical requirements
Meter shell Protection RateIP54
ProtectionclassII

Safety precautions:
* Use only isolated tools.
* Do not connect the meter to a 3 phase - 415V AC - network.
* Place the meter only in dry surroundings.
* Make sure the used wires are suitable for the max current the meter can measure.
* Make sure the AC wires are installed correctly before activating the current/voltage.
* Do not touch the meter connecting clamps directly with your bare hands, with metal, blank wire or other material as you will have the chance of an electricity shock and a possible chance for health damage.
* Make sure the protection cover is placed after installation and has been sealed.
* Installation, maintenance and repair should only be done by a certified electrician.
* Never break the seals or open the front cover as this might influence the functionality of the meter.

China STS Prepaid Keypad Single Phase Electric Meter Active / Reactive Energy Measurement supplier

STS Prepaid Keypad Single Phase Electric Meter Active / Reactive Energy Measurement

Inquiry Cart 0