Add to Cart
open type thin material straightener/ leveler-coil feeding line
Model:
JM series
Types | JM3-200F | JM3-300F | JM3-400F | JM3-500F | JM3-600F |
material width[mm] | 0~200 | 0~300 | 0~400 | 0~500 | 0~600 |
material thickness[mm] | 0.3 ~ 1.5mm | ||||
roller arrangement[mm] | ¢32×20 pcs(up 10/ bottom 10) | ||||
adjustment mode | 4 points indepent | ||||
feeding direction | L ←→ R | ||||
motor power [HP] | 1 | 1 | 2 | 2 | 2 |
voltage[V] | AC 3 phase 220V/380V | ||||
leveling speed [m/min] | 0 ~ 16 | ||||
machine weight[kg] | 200 | 250 | 300 | 350 | 400 |
Straightening Details
1, the machine uses the lifting type leveling roller group
structure, 45 degree oblique lift, can quickly and thoroughly clean
the roller and convenient mechanical inspection, to ensure leveling
accuracy, leveling for 0.3 ~ 1.5mm, stainless steel, copper, iron,
aluminum and other sheet materials, can achieve perfect leveling
effect the.
2 , the leveling roller adopts independent transmission, the upper
and the lower parts are assembled with an auxiliary roller, and the
bending direction of the material can be adjusted according to the
requirement.
3, the drum is adjusted by the original score type adjustment mode
instead of the traditional dial type regulating mode, without
additional correction, debugging is more simple and accurate,
longer service life.
4, leveling roller material adopts bearing steel, by heat treatment
quenching HRC, 60 degrees after plating hard chromium, then
grinding, high hardness, wear resistance, long life.
5. The bearings on both sides of the roller are free of oil and
without lubrication. They are wearable and free from oil or dirt.
6, frequency control speed, material operation process is not easy
to shake deformation, to ensure high precision leveling needs.
7, the inlet and outlet are equipped with inlet and outlet wheel
assembly, convenient feeding and discharging.
8, leveling machine inside lever roller, blank width 300mm above
the other with the leveling auxiliary wheel to prevent leveling
roller due to excessive pressure and bending deformation,
strengthen the leveling effect of leveling roller and the life and
improve the plate surface flatness requirement.