Interior Auto Door Trim Moulding , Custom Made Plastic Automobile Spare Parts

1. Part Name: Interior Trim Auto Parts

2. Plastic Material: PP

3. Cavity Material: 1.2343 HRC52-54

4. Mold Life: 1 million shots or according to customer'requirement.

5. Standard Accessories: LKM, DME, HASCO, MISUMI, MEUSBURGER,according to customer’s requirements.

6. Hot Runner: Synventive,HRS, INCORE, HRS, PETS etc, and will according to customer’s requirements.

7.Software: UGNX, AutoCAD, Moldflow etc.

8. Payment: T/T, to be negotiated.

9. Packaging: Packed as customer'requirement,like vaccum package.

10. Mold Logo: Based on customer’s requirements.

11. After Sales Service: One year warranty.

Specifications:

Description:

The Part Name: Interior Trim Auto Parts

Mold type: Plastic injection mold with hot runner.

Part Material: PP

Ejection Type: Ejection pins, ejection sleeves.

Mold Construction Description: Hot runner with sub gate, 2 plate mold with sliders, lifters, inserts, and shut off area.

This procut is made of PP plastic material ,The mold construction is complicated and there are many inserts, sliders, lifters and ejector pins, so it has a very high technical requirement for mold construction. The mold is a hot runner mold with the best water cooling system.

This part has very high size requirements, the defect showed below will not be acceptable, for example, weld line, dark spot , sliver marks, gas traps effect, visible ejection marks, deformation, short shot filling, burnt streaks, sink marks, flash, over dimension, under dimension, street crack etc

This mold with hot runner, the mold key advantages showed below:

1. Clamping pressure can be lower

2. Cooling time is faster

3. Cycle time is faster

4. Energy consumption lowered

5. Injection pressure can be lower

6. Injection process is cleaner

7. Injection gate are on better locations

8. Labor costs for removing the part from the mold and separating runner scrap from the part are eliminated.

9. Output increased

10. Overall profitability increased

11. Possibility of contamination is lessened with no runners

12. Possibility of producing the parts using small injection machines

13. Problems on nozzle freeze or sprue sticking are eliminated

14. Production costs are lowered

15. Production steps are shortened

16.quality of the plastic part is better

17. Regrinding is eliminated

18. Resin costs are lowered

19. Runner scrap eliminated or reduced

20. Runner weight reduces shot size