Opel Dodge Scion Toyota 2.4L 3.9L GAS OHV DOHC Serpentine Belt Replacement Drive V Ribbed 7PK1920

Opel Dodge Scion Toyota 2.4L 3.9L GAS OHV DOHC Serpentine Belt Drive V-Ribbed 7PK1920

Compatible and fits with:

What is Pk Belt

V-ribbed belt refers to the ring rubber belt with flat belt as the base, while the inner surface of the arrangement with equal spacing of 40 ° trapezoidal wedge, its working face is the side of the wedge. We use PK belt to transmit the power among the crankshaft pulley, AC compressor pulley(fan), tension pulley, water pulley, alternator, hydraulic pump…These parts are separated to each other, it is this piece of belt to make them work together.

Compared to V belt, V-ribbed belt has many advantages. V-ribbed belt has more transmission power, almost 30% higher than the ordinary V-belt when at the same space. V-ribbed belt makes the transmission system compact, and the space that the transfer device takes is 25% lower than ordinary V-belt under the same transmission power. With thin body and rich flexibility, it is able to adapt to the small-diameter pulley drive and could also drive multiple wheels at the same time. Besides, it adapts to high-speed transmission, the speed could be as fast as 40m/s; what's more, the belt has such advantages as small vibration, less heat and smooth operation. And its resistance to heat, oil and abrasion ensures its small elongation in use and long life.

Tips to V-ribbed belt

1. Wedges of V-ribbed belt broke down in use

• Band wheel does match the V-ribbed belt;

• Wedges of the belt are exposed to some solvents or other chemical medicine;

• Working temperature is too high, the cooling method should be improved;

2. Parameters of the wheel does not match the standard or the wheel gets rusty.

Precautions for purchase of V-ribbed belt

Choose a V-ribbed belt with right models and suitable wedges that are compatible with the wheel diameter and wedge slot.

Precautions for the use of V-ribbed belt

1. When the belt is exposed to oil or water in use, it is suggested
to clean or dry it up immediately;

2. The wrap angle is too small, it is suggested to change the
position of the wheel on the reverse 
side so as to increase the angle;

3. The tension of the belt is too small, it is suggested to enhance
the tension; 




4. V-ribbed belt makes noise in use

• The belt skids in use, it is suggested to dry it up in time;

• The wedge of the belt is inserted with something, it is suggested to add a protective cover for the transmission of the belt;

• The belt wheel position deviated, it is suggested to modulate it;

5. Large vibration of the belt in use, it is possible that the
tension of the belt is too small, it is suggested to enhance it.




Our quality guarantee




Our PK belt is delivered to our customer after going through strict
quality tests from the feeding process to a finished product.
Following are the quality tests concerning PK belt.




1. Quality control of rubber compound composition: conducting a
test over the rubber compound composition of each single batch of
primitive compound to ensure that the compound conforms to the
standard.




2. Quality control of hardness and weight: conducting spot checking
over finished belts to ensure the stability as well as
qualification of the hardness and weight of each belt.




3. Quality control of the belt length in each barrel: conducting
spot checking over the belt length in each barrel to control the
tolerance under 0.05mm




4. Test of the tension of the string: conducting a test over the
tension of the string of each batch to ensure that its tension
conforms to the standard.




5. Test of the service life: conducting a spot checking over the
service life for about a season or even 6 months, therefore, what
are left are all high-quality belt after screening, which means
that the quality of our PK belt is ensured.




 

 

Ningbo Maojia International Trading Co., Ltd is an industry and trade intergrating company which focuses on autoparts importing and exporting. It has taken a leading position in domestic and international markets with high-quality products and professional technology. Following the trend of the development of international automobile industry, based on the development and inspection of the module product, Maojia supplies timing belt kit, chain kit, full gasket set and a series of autoparts. Our products cover a wide range of gasket sets, and the application includes European, American, Japanese and Korean cars and diesel trucks. The quality of the main parts, like head gasket and oil seal, reaches OE standard. The products are supplied to many domestic automotive OEMs and the quality assurance reaches 100000 kilometers.

Recent years have witnessed the company’s intergration of the product supply chain and the construction of the foreign sales channels. Knowing the foreign autoparts markets well, the company has abundant of purchasing and marketing. The company has several manufacture bases through alliance and holding, which has formed a large supplier alliance system, becoming an important part of the value chain. In the international market, based on years of developing and accumulating, Maojia’s products have gained a huge success in American, European, the Middle East and African markets. With hunderds of customers cooperating with us in long term, we also established our own warehouse and logistic distribution center at abroad.

The company takes warehouse inventory management, which can meet individual need of different kinds of customers. Sufficient stock of products is available, especially the popular ones, to meet customers’ demands at any time. Meanwhile, our company actively imports advanced technology at home and abroad, making use of automatic assembly line and ERP system. Product inspection and quality control is our focus. With ISO9001/14001 Management System Certification, the company is dedicated to offering brand products with high-quality and competitive price to our customers.

Welcome customers from home and abroad to our company for a visit and develop with us together.