High Power White SMD LED PCB Board 20mm*20mm With Lens Diameter 5.4mm CCT 5000-6000K

Datasheet:DL-HP10W57-3WP.pdf Light source: White
DL-HP10W57-1WP.pdf Light source: White

3W High Power White LED​

NOTES: All dimensions are in millimeters (inches) tolerance are ±0.25mm (0.01inch) unless otherwise noted.

Features:

1. Small package with high efficiency
2. Long operating life.
3. Available in white, green, blue, red, yellow, Amber
4. View angle: 120°.
5. Low voltage DC operated.
6. The product itself will remain within RoHS compliant Version.
7. ESD protection.

Applications:

1. Reading lights (car, bus, aircraft).
2. Portable (flashlight, bicycle).
3. Mini accent/Uplighters/Downlighters/Orientation.
4. Bollards/Security/Garden.
5. Cove/Undershelf/Task.
6. Automotive rear combination lamps.
7. Traffic signaling/Beacons/ Rail crossing and Wayside.
8. Indoor/Outdoor Commercial and Residential Architectural.
9. Edge lit signs (Exit, point of sale).
10. LCD Backlights/Light Guides.

Absolute Maximum Ratings at Ta=25℃

Notes:

• Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
• The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

• Package Dimension:

• Please read the following notes before using the datasheets:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will

cause big current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
3. Soldering Condition
3.1 Pb-free solder temperature profile.
3.2 Reflow soldering should not be done more than two times.
4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the

damage of the product is often started at the time of the hand solder.
5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,

a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.


For more details, please contact us.
Email:Facebook@doublelight.com.cn

DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD was founded in 2005. A professional LED manufacturer located in Shenzhen,China.

We produce a wide range of products with automatic production lines,which including THT LED,Chip LED,LED display,Infrared LED,dot matrix,LCD backlight and LED lighting fixtures.

Our well trained employees tegether with a strong R&D team can meet with not only the standard but also customized requests.The factory passed ISO9001 and ISO14001 certificates.

At our 6000 square meter factory,we have 8 production lines manned by 800 employees.All of our raw materials are RoHS directive-compliant,from Taiwan,U.S.A,Japan and South Korea.

Our management team works according to an ERP management system and our QC staff inspecting all processes from incoming materail,production line,to outgoing products with strict inspection stadards.

Our fast delivery time,even can be in just 1-2 weeks for urgent demands.

Customize orders are welcomed,as we have a 16 member R&D team-average with over 5 years’experience.We are glad to receive your ideals or designs and turn them into reality.

Quality is our culture.

Work with us,your money in safe,your business in safe.

We sure Doublelight will be your perfect partner in the future!

Inquiry any LED products,contact us today.

Double Light LTD's organizational structure