Waterproof Sandwich Structure Outdoor Wall Mounted Cabinet With Telecom Power System And Battery

Waterproof Sandwich Structure Outdoor Wall Mounted Cabinet With Telecom Power System And Battery

Quick Details:

Payment & Shipping Terms:

1. Application

The ET6565115-W Wall Mounted Outdoor Telecom Cabinet is widely used in wireless communication base station, such as 3G system, communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc.

2. Specifications

(1)Technical Parameters

(2)Accessories List

3. Structure
The cabinet is made of hot dip galvanized steel, double walls structure. There are heat insulation between the two walls. It is easy for installation and with perfect sealing performance.

Equipment Compartment: The ET6565115-W cabinet is used for installing telecom equipments and battery. The cabinet is a double-wall cabinet, with heat insulation between the two walls. It uses 4 fans for cooling. It is sunproof and waterproof.

Door and Door Lock: The cabinet door uses embedded structure. The door opening angle is larger than 110° and the door limit device can limit the opening angle. The lock is theftproof three point lock, supports padlock.

Cabinet External Size : 650x650x1150mm (W×D×H),
Cabinet Internal Size : 550x550x950mm (W×D×H)

4. Features

4.1 The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment.
4.2 The cabinet use heat exchanger and fans for cooling.
4.3 The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There’re entrance holes individually for power cable, signal cable and optical cable.
4.4 All the cables used in the cabinet are made from flame retardant materials.
4.5 Perfect protection
● Integrated top cover, good seal, water proof
● Protection Grade: IP55
● High stability, anti-UV radiation
● Anti-corrosion
4.6 Heat Insulation
● Sandwich structure insulates the outer heat conduct, keeping temperature inside cabinet without abrupt change, anti-condensation, reducing heat management energy consumption.
● High performance PEF insulation material

5. Technical Specs

5.1 Applicable environment conditions:
Environment temperature: -40°C ~ + 60°C
Environment humidity (RH): ≤95% (at + 40°C)
Air pressure: 70kPa ~ 106kPa
5.2 Material: hot dip galvanized steel
5.3 Surface treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
5.4 Cabinet load bearing: ≥600kg
5.5 Ingress protection: IP55
5.6 Flame retardance: comply with GB5169.7 test A
5.7 Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2X104M/500V(DC).
5.8 Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V (DC) /1min.
5.9 Mechanical strength: each surface can bear upright pressure＞980N; after the door is open, its outer end can bear upright pressure ＞200N.

6. Description

6.1 Cable Entrance
All outside cables use bottom entrance method.

6.2 Grounding Protection
(1) The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
(2) The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.

6.3 Theft Proof Design

Door lock theft proof design
(1) Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.

(2) Three point lock

6.4 Connection and Fastening
(1)Use anti-loose threaded connection as structure and bearer connection. Anchor bolt for fixing cabinet use?hot dip galvanized bolts.
(2)Door hinges use inner hinge mode.

6.5 Appearance and Surface Treatment

Cabinet surface coating is outdoor special powder coating, with white gray color (PANTONE 428C). The coating complies with GB/T 3181-2008 requirement.

6.6 LED lamp, LED lamp sensor, door sensor and fan are installed at the top of the cabinet.

6.7 Ventilation

Air Outlet:

Air Inlet:

6.8 Installation Method-Wall Mounted Methods

7. Packing

The cabinet packing is wooden case in compliance with GB3873-83, damp proof and shock proof. The outside of the packing is painted with damp proof sign, shock proof sign, direction sign, etc.

Introduction

Tianjin Estel Electronic Science and Technology Co., Ltd, located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.

The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.

Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.

“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.

Company Capability

Trade & Market