Fan Motor Shaded Pole Stator Coil Needle Winding Machine Wind 4slots Per Time

Fan Motor Shaded Pole Stator Coil Needle Winding Machine Wind 4slots Per Time WIND-1A-TSM

Application:

Shaded motor stator winding stepper motor winder is dedicated machine for wind 4poles stator,

Four pole stator winding machine WIND-1A-TSM wind 4slots per time for shaded motor

Four nozzles can get 1pc per time with high efficiency

Advantages:

1.Four needles work at same time,get 1pc wound shaded pole stator in one time, no need indexing,

fast and high efficiency

2. Four sets automatic clamp and cut wire device, wind shaded pole motor 4slots at same time,

and cut wires automatically

3. Dedicated machine especially for shaded pole stator

Specification:

Wire diameter:0.08~1.00mm

Stator ID:15~65mm

Core length:7-90mm

Turns No.0-99999

Operation option: stepping,Auto

Stator poles: 4 poles

Air pressure:5~7kg/square centi-meter

Power:2KW, AC220V 50/60Hz

Dimension: 1550*900*1450mm

Weight: about 450kgs

Winder Configuration:

Big power Stepper motor

Mitsubishi PLC

Embedded human - machine interface

AIRTAC cylinder

Winding turns is related to the output current and torque,KV value.The smaller turns number of motor

stator, the higher the KV value, the lower the rated voltage, and the higher the rated current.

About KV value: even the same series of motors, there are several different versions of the KV value

parameters. Different KV values guide how to choose the electric harmonic battery pack. Here we will

explain more about how to choose a suitable KV value motor from the existing battery pack and electric

adjustment. For the same series of motors, the low KV version of the motor has a larger number of coil

turns, and the high KV value motor is the opposite. But as long as they have the same quality copper wire,

they will have the same maximum power, torque, efficiency and maximum speed under different voltage or

current. That is to say, under the same mass copper wire, the low KV value of the motor copper wire is

smaller, the number of turns is more, and the high KV value motor is the opposite. Moreover, the same

motor stator winding, can more the performance quality of copper wire is better (tankful rate). A chestnut,

a series of identical motors, with the same mass of copper, the electrical resistance of the 8 turn coil is 1

Omega, and the resistance of the 4 turn coil is 0.25 Omega. The difference of the resistance is 4 times.

Because the length of the 4 turns is doubled, the section area is doubled. It is known that when the

voltage of the 8 turns is two times that of the 4 turn motor, the input power is the same. And at this time

the copper loss P = I*I*R is exactly 4 and 4 times the resistance, so the copper loss is the same. That is,

both at the same time the hardness is the same, also known as the speed - torque characteristics are the

same. When the input voltage is the same, the difference of the input power is 4 times. At this time, the

torque of the 4 turn motor is much larger, and the speed of the 4 turn motor is twice as fast as that of the

8 turn, but at this time, the current of the 4 turn motor is 4 times of that of the 8 turn motor. In general, D

(tankful rate constant) change the number of turns, the hardness of the motor is constant, if the low KV

value of the input voltage of the motor is two times as high as the KV value, then the speed torque curve

of two motors should be the same. For the same load, the motor with low KV value is 1/2 higher than the

KV value, and because the resistance of the low KV value motor is 4 times higher than the KV value, so

the copper loss is the same, and the input power of the two is the same, so the efficiency of the two is the

same. Because the size of stator determines the rated power output of this series of motors, so the

advantage of low KV value motor is to output the corresponding stator rated power, but the required

current is low, but the required voltage is high. The advantage of the high KV - value motor is that it can

correspond to the rated power of the stator at a lower voltage, but at this point the current is higher. The

"low KV - value motor torque", which has been circulated, is based on the same current condition. The

same stator and tankful rate, low KV motor KV motor 4 turns and 8 turns are equivalent, the premise is the

input voltage of the former is half of the latter. Therefore, from the stator size of the motor to the KV value

of the motor, it is closely related to the parameters of the battery group and the electrical adjustment. In

view of the fixed technical parameters of the battery group, the corresponding motor should be selected

according to the parameters of the battery group. According to the following steps: A., such as 10 series

batteries, can probably output 500W, so the stator size of the motor is also about 500W of the rated

power.

Video:

Shanghai Wind Automation Equipment Co.,Ltd supply motor automation solution for global motor manufacturers. Setted up in the year 2010 by Senior Engineer Mr.Wang who involve in electric motor filed since 1998. Through continuous innovation and participating in globalization, it has now developed into a large enterprise that integrates R&D, production and sales to provide motor solutions for customers worldwide.

Shanghai Wind Automation built a 3C business system

1.Customized Machinery

​ Provide armature,stator motor manufacturing mchinery,

including stand along machine, fully-auto complete production line

​

2.Characteristic Component

Supply the full range of motor components such as commutator, magnet, fan, motor cover,etc.

3.Comprehensive Service

Provide motor project technical support and consulting

Centered on Shanghai, the company has formed four production bases in the Yangtze River Delta city group and supplied over 20 countries including USA, Mexico,Brazil, Argentina, Turkey,France,Germany,

Czech Republic,Romania,India, Bangladesh and So on.

Our objective is to provide turn-key motor manufacturing automation equipment with no limitation

as free as the Wind, reduce the labor cost and free the human being operator,

make the life easier and more enjoyable.