Customized White Marble Bathroom Floor Tile Stable Chemical Composition
Brand Name:DAVID STONE G6802 white marble tile
Certification:white marble tile
Model Number:DM-093 white marble tile
Minimum Order Quantity:80sqm
Delivery Time:Within 30 days for 1*20'FCL
Place of Origin:CHINA GUANGXI
Contact Now
Add to Cart
Active Member
Location:
Xiamen Fujian China
Address:
Room 1714, No105, Haifeng Road, Jimei District, Xiamen, Fujian, China
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Xiamen supplier from China quarry high quality best price white marble tile
China Guangxi white with its features of white surface, cloud like landscape texture, low price etc.It is always the first choice for building decoration (interior wall, window, ground lines, etc.) "Hezhou white" calcium carbonate content is more than 99%, whiteness is greater than 95 degrees.It has the characteristics of high whiteness, good purity, mild hue, stable chemical composition, no sulfide and other harmful elements.It enjoys a good reputation both at home and abroad. The main technical indicators are far more than the United States, Japan and other similar products, to achieve the level of China's top grade mine.
How to Install Marble Tile
Installing marble tile flooring can add beauty and elegance to a bathroom or foyer. With a variety of options in coloring and finish, marble tiles can complement virtually any color scheme. Installing marble floor tile is not an easy process but can be done on your own if you are careful and patient.
Part A Prepare
1 Wear gloves, eye protection and a facemask. These will protect your hands, eyes and lungs as you install your
marble tiles.
2 Remove any existing tiles. If you are installing the marble on a floor that is already tiled then you must remove the old tiles first.Ceramic tiles can be smashed with a hammer and then removed.Vinyl tiles should be ripped up with a pry bar.
3 Clean the floor surface you plan to tile and allow it to dry. Before installing any tiles you will want to make sure that the
floor surface beneath the tiles is thoroughly cleaned and dried.
4 Use a long level to make sure the floor area is level. Marble is a very soft tile and can be particularly susceptible to
cracking if it is not installed on a level surface. Use the longest
level possible to make sure your floor is level.You can try sanding
down any bumps that raise the floor or filling in any depressions
in the floor surface with thin-set cement. Wait for the cement to
completely dry before continuing.You may also need to lay a plywood
subfloor to make the floor level.Marble should not be installed on
a floor that has a change in height that is more than ¼ inch (6 mm)
in a distance of 10 feet (3 m).
5 Inspect the tiles. Run your finger nails over the tiles to make sure there are not
cracks or gaps in the polished surface of the tile. You should not
use any tiles that have these cracks or gaps because they might
break in the process of installation or use.Most hardware stores
will accept exchanges of tiles that have cracks or gaps in them.
6 Measure the length and width of the floor and create a layout on paper. Plan your installation on paper using the floor dimensions and sizes of the tiles. Decide on your pattern for laying the tiles. You can lay them in rows or in a pyramid-like structure or in other patterns. Draw the pattern to scale on paper.You want to keep most tiles full-sized so that you do not have to cut them.
7 Mark the center of your floor. Measure the center of each wall and make a light mark with a pencil. Then take a chalk snap line and hold it to either end of the centers of two opposing walls. Lower the line and snap it to the floor to make a chalk line. Do this for the other two walls as well. Where the two chalk lines meet is the center of your floor.You usually want tiles to radiate from the center of your floor.
8 Mark your grid on the floor using the chalk line. Continue snapping the chalk line on the floor in the planned grid. This will mark down where your tiles should go.You also do not want strips of tile that are less than 2 inches (5 cm) wide.
| Density: | 2.60g/cm3 |
| Whiteness: | 95 |
| Water Absorption: | <0.11% |
| Flexural strenhth: | 10.1 Mpa |
| Compressive strength: | 106.8 Mpa |
| Key words: | White marble tiles |
White marble tiles detail:
White marble tiles Packing:
28-30 pcs cut slabs / crate, 12-13 crates / 1*20'FCL, Maximum loading : 27 tons
Thick white mable tile:
Customized White Marble Bathroom Floor Tile Stable Chemical Composition
Inquiry Cart
0