Power Signal Poe Surge Protector , Gigabit Network Surge Protector With Ethernet Protection

Gigabit network Simple installation guide Protect network cable equipment for surge protector

Model: TRSS-RJ11 / 45

Color: white

Authentication: CE ECM

Brief introduction

The TRSS-RJ45/8 type network lightning arrester is a lightning protection measure taken by Zhejiang tohr Electric Co., Ltd. to independently develop and manufacture the network system. It is used to protect sensitive high-speed communication network from damage caused by lightning induced voltage, power interference, electrostatic discharge and so on. The signal lightning arrester adopts the multilevel protection circuit, selects the world famous brand components and makes use of the advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on. It is suitable for railway communication system, mobile base station, differential station, hard disk recorder, video surveillance equipment, optical terminal and other network transmission equipment to avoid overvoltage damage such as inductive lightning stroke and electrostatic discharge introduced by the system.

Product features

1. the product has many interfaces and is easy to use. It doesn't need to worry about the number of interfaces.

2. upgrade transistor is equivalent to 2 diodes

3. self protection voltage is more than self protection, automatic disconnection and recovery.

4. multi-functional overvoltage protection, lightning and overpressure are no longer afraid of disasters.

Product specification

Working principle of product

The lightning arrester not only can protect the high voltage of the atmosphere, but also can be used to protect the operation of high voltage. If there is a thunderstorm, a high voltage will appear and the electric equipment may be dangerous. At this point, the arrester will play a role to protect the power equipment from damage. The most important function of the arrester is to limit the overvoltage to protect the electrical equipment. Lightning arrester is a device to make the lightning current flow into the earth, so that the electrical equipment does not generate high voltage.

Use of attention

1. connect the grounding wire of the lightning protector with the ground wire of the lightning protection system.

2. the lightning arrester of the network switch is a series connection mode.

3. please choose the network switch lightning protector that is the same as the protected device's interface type.

4. lightning protection device IN as input and OUT as output, the input end is connected with the outside, and the output end of the input end of the connecting device is protected.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.