Factory directly Sales replacement Center distance size 1227*257mm N40 NBR/EPDM GEA Plate Heat Exchanger Plate&Gasket

Factory directly Sales replacement Center distance size 1227*257mm N40 NBR/ EPDM GEA Plate Heat Exchanger Plate & Gasket

Supply GEA Plate Gaskets Model: VT04P VT10F VT20-C VT20-G VT20P VT40-C VT40-G VT40P/M VT40P VT80-C VT80-G VT80M VT80P VT805 VT130F VT130K VT405 VT1306 VT2508 NT10 NT50T NT50X NT50M NT100T NT100M NT100X NT150S NT150L NT250S NT250L NT350S FA184 FE184 LWC100T N40 VT2508

Plate heat exchanger gaskets for the Semiconductor industry

QP Silastic:

Silastic gaskets are the highest purity gasket solution available, containing a silicon elastomer that is based on diethyl and methylvinyl siloxane (VMQ) copolymer that is reinforced with silica. We utilize medical grade silastic to meet the industry’s stringent purity demands when measurements of parts per trillion are needed for UPW applications. Silastic gaskets are recommended for use with both titanium and stainless steel, but not to be used with temperatures exceeding 100°C (212°F) with water or steam due to hydrolysis reaction. These gaskets are also ozone resistant, which means they can be stored for later use with proper packaging.

Viton: We offer two types of Viton gaskets – FKMT and FKMG. Made of a special fluorocarbon material, these gaskets are tailor-made for use with high temperature steam applications. Viton gaskets are recommended for use with distilled water and systems when lower purity measurements are desired – such as parts per million. Viton gaskets can be used with stainless steel plates up to 180°C (356°F) and up to 100°C (212°F) with titanium plates.

NBR: The Alfa Laval NBR rubber base is made of an acrylic nitrile and butadiene type of rubber polymer, which gives an oil resistant gasket material combining good oil and solvent resistance at a competitive price. NBR gaskets are the most cost-effective option and are ideal for water-to-water use in non-process related duties such as heat recovery and potable water applications. These gaskets should not come in contact with UPW or steam. NBR gaskets can be used in temperatures up to 138°C (280° F) and are readily stocked and available for immediate delivery.

FEPM: FEPM is a fluoroelastomer based on an alternating copolymer of tetrafluoro ethylene and propylene. These gaskets have excellent chemical resistance in ammonia/ amines, crude oil, hydrogen sulphide, oxidizing fluids, high temperature steam, bases and acids. FEPM gaskets can be used with both titanium and stainless steel plates. They are recommended for use in high temperature applications and for distilled water processes and systems when lower purity measurements are required – such as parts per million. Alfa Laval is currently testing the FEPM material in an actual semiconductor process. (Note: FEPM gaskets cannot be used below 10°C (50°F)).

EPDM and EPDMP: EPDM gasket material is based on an ethylene-propylene type of rubber polymer. These gaskets have a resistance to water, steam, salt solutions, acids and alkalies and are very good with exception of strong oxidizing acids such as nitric acid or strong hot sulphuric acid. EPDM gaskets can be used with water-to-water and high temperature applications, but it’s recommended that these gaskets do not come in contact with UPW, distilled waters or high purity systems.

APPLICATIONS:

1. Plate heat exchanger units
2. Plate Cooler Units
3. Heating and cooling of clean liquids
4. Food industrial brewery
5. Evaporators and condenser units
6. Boiler, district heating and ventilation
7. Solar heating and air conditioning units
8. Heating pumps and heat recovering units
9. Etc.

ADVANTAGES:

The various models for your choose, Exist Mould .

High quality and competitive price, fast delivery.

Design more compact engineered systems.

Install a more cost effective, superior solution to your heat transfer applications.

Reduce cooling media volume, further reducing the cost of fluid handling systems and energy consumption.

Simplify maintenance and repair.

Display Show :

Provide you with quick delivery and the most competitive pricing available.

All these models are exsit moulds,Welcome to inquiry us,welcome to visit our factory,we also manufacture Plate heat exchanger. Our brand is HRSB and BEST,if any request.please feel free to get touch us.