5um,0.5um,2um,0.2um325 * 660 Non - Woven Dust Filter Cartridge With Square End Cap Easy To Install
Brand Name:Air
Model Number:AR-PE3266
Minimum Order Quantity:Negotiation
Delivery Time:around 2 weeks upon receipt signed&stamped PO
Payment Terms:T/T(Negotiation)
Place of Origin:CHINA
Contact Now
Add to Cart
Active Member
Address:
Hexing Industry Park,Jinfeng Town, Zhangjiagang City,Jiangsu Province,China
Supplier`s last login times:
within 30 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Square End Cap Dust Replacement Air Filter Dust Filter 325 * 660 Polyester Fiber / Non-Woven / Dust Filter Cartridge Descriptions:
Performance Description
- Wider pleat width
- High filter efficiency
- Suitable design for easy to self-clean
- Top open, bottom open/ bottom close with deflating bolt hole
- Galvanized stainless metal configuration
- Rubber seal
- Various ways of flange installation
- Superior ability of pressive strength
- Good abrasion resistance and other after-treatment of filter material
- Washable filter media, can be used many times
Square End Cap Dust Replacement Air Filter
Product Description
| Cartridge Model | Top Cap OD mm | Top Cap ID mm | Bottom Cap OD mm | Bolt Hole mm | Height mm | Filtration Surface m2 |
| 3266 (Square Cover) | 406*362*Φ324 | φ213 | Φ324 | / | 660 | 9.4 |
| 3266 (Square Cover) | 406*362*Φ324 | φ213 | Φ324 | / | 660 | 9.4 |
| 3266 (Square Cover) | 406*362*Φ324 | φ213 | Φ324 | / | 660 | 21 |
Dust filter cartridge
Product features:
| Top cap | Galvanized steel / stainless steel |
| Gasket | EPDM / Silicone |
| Inner mesh | Galvanized steel |
| Outer mesh | None / galvanized steel |
| Closed bottom cap | Galvanized steel |
| Filter media | Polyester / cellulose |
| Installation ,method | Side-install, chuck type |
| Wide pleated design , high filtration efficiency | |
Filter is a certain length of the filter material folded into a
fold, the first end of the star-shaped filter cartridge. Filter
cage without cage, easy to install.
There are many varieties of filter, with thin and long and thick
and short points. (Such as φ ≤ 160, L = 1 ~ 2m), the pleats (such
as 45 fold) between the large gap, the angle is large, shallow and
shallow folds, filter area than the same diameter filter bag 2 ~ 5
times, easy to clean and effective; for concentration ≥ 15g / m
dust filter dust, filter wind speed 0.6 ~ 1.2m / min. (Such as
φ350, L = 0.66m) large diameter, short length, pleats more (120 ~
350 fold) and deep, small gap between the gap, large filter area,
compared with the same diameter with the same filter bag area 14 ~
35 times, suitable for small site area, small space layout.
Filter cartridge dust collector installed in three ways: vertical,
tilt, horizontal installation. Cartridge vertical installation,
pulse cleaning, the dust is easy to settle down to the ash bucket,
the effect is good. Tilt installation, the cartridge up and down
the stack, compact structure, small footprint, easy to change the
tube, but the cleaning, the upper filter dust off the dust on the
lower filter, it is difficult to clear. Horizontal installation,
the lower part of the filter cartridge dust is more difficult to
remove. Tilt installation filter cartridge for small and medium
dust removal system non-sticky, low concentration, coarse dust
dust, but also for some old bags of dust with the transformation.
Application:
Electronic,rubber,battery and others
Can replace relevant products of FARR,TENKAY,GE,NORDIC
Dust filter cartridge
Square End Cap Dust Replacement Air Filter Dust Filter 325 * 660 Polyester Fiber / Non-Woven / Dust Filter Cartridge Details Show:
https://youtu.be/IV795B_37vU
https://www.youtube.com/watch?v=h7xUgYrQosA
5um,0.5um,2um,0.2um325 * 660 Non - Woven Dust Filter Cartridge With Square End Cap Easy To Install
Inquiry Cart
0