Home /Seals /

High Speed Water Drilling Rig With Turnplate Rotary 11.6m Height Drill Tower

High Speed Water Drilling Rig With Turnplate Rotary 11.6m Height Drill Tower

Brand Name:JINLUDI
Certification:CE
Model Number:SPJT300
Minimum Order Quantity:1 set
Delivery Time:15-20 days
Payment Terms:T/T, L/C
Contact Now

Add to Cart

Active Member
Location: Jinan Shandong China
Address: No.61 of East JieFang Road, Jinan City, ShanDong Province, China
Supplier`s last login times: within 34 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

trailer chassis water drilling rig


SPJT300 Water Well Drilling Rig is installed on a trailer. This drilling rig can work through rotary mud circulation or DTH drilling technique. SPjT300 trailer chassis water well drilling rig is suitable for clay, sand, graveland pebble, and rock stratum. We add special device to add & reduce pressure during drilling which can enhance efficiency a lot. High hydraulic leg and hydraulic tower are chosen to save labor and keep safety during working.


◎ when drilling, the drilling rig uses an independent diesel engine as power, and uses mechanical transmission to make the mechanical winch and rotary table work at the same time;

◎ the drilling rig is equipped with four hydraulic support legs, which can move at the same time as well as independently, facilitating quick leveling of the drilling rig. Moreover, the two rear legs can extend horizontally, thus improving the stability of the whole drilling rig. Using hydraulic cylinders to lift the tower is convenient, reliable and simple to use, which can meet the construction requirements of different working conditions to the greatest extent.

◎ the main parts of the drilling rig, such as winch, turntable, gearbox, tower and chassis, are produced by our factory independently, with stable and reliable performance.

◎ the drilling rig is suitable for drilling high-rise buildings, bridges, geological mines, ports, dam foundations, water well construction, complicated ground source heat pump, etc.

◎ the drilling rig is simple to operate, has strong usability, convenient maintenance, less investment and quick effect, and is the best product for users.

MAIN PATAMETER


drilling hole diameter

500mm

drill tower rated load

180KN
depth300m

drill tower height


11.6m(SPJT300)


turnplate max. torque

8.0KN/mdimension12m×2.47m×3.4m
speedclockwise(reverse)44,77,139rpmpower80hp

turnplate diameter

450mmtransportation status

in bulk/trailer

lifting capacity of single rope of main hoist

30KN

weight of main rig

13.5t(SPJT300)

lifting capacity of single rope of secondary hoist

20KN

weight of drill rod, pipe &bit

6.6t
Mud pumpBW850/20 (20Mpa pressure/850L/min)

Configure of one set of spjt300

nocodenamequantityremark
Amain rig1 group
11C-0turnplate1group
22-0hoist1group

Advanced gearbox and clutch

33B-0transmission1groupModel 4135Na
4FT0-0drill tower1set
5BW850/20mud pump1setincluding all tools and hose
6accessories1 set(steel wire 80m plus 120m, protecting-cover etc.)
Btools
1FG1-0water tap1 piece
2FG2-0block group1piece
3FG3B-0/8000kelly rod1pieceL=7650mm
4FG5-0lifter1piece
5FG7-4joint1piece
6FG8-0fork1piece
7FG9A-0fork1piece
82-6A-0shaft1piece
921/2"hose1piece
10FG12-4/6500/R780drill rod 89*10*6500mm43 piecesMaterial:R780
11FG7-1/2joint43pairs


Mud pump Type


Horizontal double cylinder reciprocating double action piston pump


Cylinder diameter

150(mm)



Stroke
180(mm)

Pump speed
82 r/min58r/min

Flow
850(L/min)600(L/min)

Pressure
2.0(MPa)3.0(MPa)

Power
37(Kw)

shape size
2000*1030*1400(mm)

Weight
1500(kg)

China High Speed Water Drilling Rig With Turnplate Rotary 11.6m Height Drill Tower supplier

High Speed Water Drilling Rig With Turnplate Rotary 11.6m Height Drill Tower

Inquiry Cart 0