Add to Cart
ASTM E1354 Building Material Cone Calorimeter ISO 5660-1
Application:
This equipment is used for assessing the heat release rate and
dynamic smoke production rate of specimens exposed in the
horizontal orientation to controlled levels of irradiance with an
external igniter.
Equipment standard:
- ISO EN 5660-1
- ASTM E1354
- BS 476:PART 15
- ASTM E1474
Working conditions:
the working environment temperature | 0 ºC ~ 50 ºC |
Humidity of working environment | <80% |
Power supply | 380V ± 50%,50Hz ± 2% |
Cone-shaped radiant electrical heater:
- capable of delivering 5000W at the operating voltage of 230V.
- irradiance of the surface of the specimen shall maintain in a
preset level of up to 75 kW/m2.
- three K-type thermocouples for controlling the average
temperature of heater ( ±10˚C )
Removable radiation shield:
to protect the specimen from the irradiance prior to the start of a
test.
Weighting device:
- a resolution of 0.1 g and an accuracy of ± 0.3 g.
- a 10% to 90% response time of 4s or less.
- Measuring the mass of specimen of at least 500 g.
Specimen holder:
- a square pan with an opening of (106 ± 1) mm at the top, and a
depth of (25 ±1)mm
- a ceramic fibre blanket of density 65 kg/m3 by 13 mm thickness at
the bottom.
Ignition circuit and timer:
- a spark plug powered from a 10kV transformer or spark igniter.
- recording elapsed time to the nearest second and an accurate to
within 1 s in one hour.
Oxygen analyser:
- paramagnetic type, with a range of 0% oxygen to 25% oxygen.
- a drift of not more than 50 µl/l of oxygen over a period of 30
minutes.
- a 10% to 90% of full-scale response time of less than 12 s.
Smoke obscuration measuring system
- a helium-neon laser (between 0.5 mW and 2 mW, polarized), silicon
photodiodes and reference detector.
Features:
About daxian company:
DAXIAN's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, LED, photoelectricity, mobile,
plasticand rubber, telecommunication, chemical industry, aerospace,
building material and product, wire and cable,textile and fabrix,
etc. All DAXIAN testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.