ASA5505-SEC-BUN-K8 Cisco ASA Firewall ASA 5505 Sec Plus Appliance With SW, UL Users , HA, DES

Cisco Series Firewall ASA 5505 Sec Plus Appliance with SW, UL Users, HA, DES ASA5505-SEC-BUN-K8

Description:ASA 5505 Sec Plus Appliance with SW, UL Users, HA, DES.

Cisco ASA 5500 Series Adaptive Security Appliances ASA5505-SEC-BUN-K8 is easy-to-deploy solutions that integrate world-class firewall, Unified Communications (voice/video) security, SSL and IPsec VPN, intrusion prevention (IPS), and content security services in a flexible, modular product family.

Designed as a key component of the Cisco Self-Defending Network, the Cisco ASA 5500 Series provides intelligent threat defense and secure communications services that stop attacks before they impact business continuity. Designed to protect networks of all sizes, the Cisco ASA 5500 Series enables organizations to lower their overall deployment and operations costs while delivering comprehensive multilayer security.

Quick Specs

Table 1 shows the Quick Specs.

This section describes how to connect the cables to the Ethernet and Console ports.

Warning Only trained and qualified personnel should install, replace, or service this equipment. Statement 49

Caution Read the safety warnings in the Regulatory Compliance and Safety Information for the Cisco ASA 5505 Adaptive Security Appliance and follow proper safety procedures when performing these steps.

To connect cables to the ports perform the following steps:

Step 1 Place the chassis on a flat, stable surface.

Step 2 Before connecting a computer or terminal to the ports, check to determine the baud rate of the serial port. The baud rate must match the default baud rate (9600 baud) of the Console port of the adaptive security appliance. Set up the terminal as follows: 9600 baud (default), 8 data bits, no parity, 1 stop bits, and Flow Control (FC) = Hardware

.

Step 3 Connect the cables to the ports.

a. Ethernet ports

Step 1 Connect Port 0, the outside Ethernet port, to the public network, that is, the Internet:

Note By default, switch port 0/0 is the outside port. If needed you can change the inside and outside ports assignments later.

Step 2 Connect your network devices with an Ethernet cable to one of the inside ports (numbered 1 through 7).

If you are connecting any PoE devices, connect them to one of the switch ports that support PoE (ports numbered 6 and 7).

Step 3 Check the LINK LED to verify that the network devices have basic connectivity to the Cisco ASA 5505 on one of the inside ports (numbered 0 through 7). When connectivity is established, the LINK LED on the front panel of the Cisco ASA 5505 lights up solid green.

Figure 2 Connecting Cables to Network Interfaces

Step 4 Connect the power cord to the adaptive security appliance and plug the other end to the power source. For information on powering on the chassis, see the “Powering on the Cisco ASA 5505” section

Our Advantage

1. Extensive Real Inventory
2. Save up 50%-99% off the Global Price list
3. Flexible payment shipment
4. Unparalleled Experience Service

Shipping:

1. Fast: in 2-3 days upon receipt of payment.
2. Safe: original package with protection foam in case of equipment broken in transportation.
3. Economic: Low cost express fee via DHL, Fedex, TNT,EMS,Postal etc.
4. Flexible: We also ship to your Assigned Forwarder or Pickup by your forwarder.

SENYDA(HK)Technology Limited-The industry's leading network equipment and solutions integrator,Founded in 2011,Since its inception, adhering to the "for partners to solve network solutions and create value" core values, and to "honesty, tolerance, service" as the spirit of enterprise, to carry out global business.

The company is headquartered in shenzhen, the main sales CISCO,Huawei, HP, IBM servers and memory devices, Tianyida with the United States, Canada, Britain, Russia, Saudi Arabia, India, Arabia, the United Nations and other regions of the network and electronic integrators to establish long-term business cooperation,