Add to Cart
SUS#304 Stainless Steel constant temperature humidity test chamber -40℃
Other model for options
Model | XB-OTS-225L | XB-OTS-408L | XB-OTS-800L | XB-OTS-1000L |
Chamber Volume(L) | 225L | 408L | 800L | 1000L |
inner chamber size(cm) | 60*75*50 | 80*85*60 | 100*100*80 | 100*100*100 |
External size(cm) | 110*167*110 | 130*177*120 | 150*192*140 | 150*192*160 |
Technical Specification:
Model | XB-OTS-80L | XB-OTS-150L | ||
Interior Dimension (mm) | 400×500×400 | 500×600×500 | ||
Overall Dimension (mm) | 90×142×100 | 100×152×110 | ||
Interior Dimension (mm) | 600×850×800 | 800×1000×1000 | ||
Overall Dimension (mm) | 1210×1140×1960 | 1280×1480×2030 | ||
Parameter | Temp. range | Model S:-70°C~+150°C ,Model L: -40°C~+150°C | ||
Humidity Range | 20% ~ 98% R.H | |||
Humidity bias | +2~-3%R.H | |||
Temp. fluctuation | ≤±0.5°C | |||
Temp. uniformity | ≤2°C | |||
Heating rate | 1.0~3.0°C/min | |||
Cooling rate | 1~1.5°C/min | |||
Material | Shell material | High-quality SUS304 stainless steel plate | ||
Liner material | High-quality SUS304 stainless steel plate | |||
Insulation materials | Ultra-fine glass fiber insulation cotton / rigid polyurethane foam | |||
Door seal | Double resistance to high and low temperature aging and hardening of refined silicone seal | |||
Cold and heat exchange system | Controller | JIANQIAO Special color touch screen Controller | ||
Accuracy range: temperature ± 0.1 °C, indicating accuracy: temperature ± 0.1 °C, resolution: ± 0.1 °C | ||||
Circulatory system | Temperature low-noise motors, cycles, , stainless steel multi-leaf type centrifugal fan,the test time can set 999999 hours | |||
Water supply | Electronic device controller automatic control of liquid, and more than recycled water, with water alarm | |||
Humidification mode | External isolated, stainless steel electric steam humidification mode occurs | |||
Dehumidification mode | Condensation method using the dew point temperature of the evaporator coil dehumidification mode laminar contacts | |||
Refrigeration | Unit cooling mode / Dual (cascade) cooling method (air-cooled) | |||
Condenser/ Evaporator | Tecumseh | |||
Compressor | France " Tecumseh " closed refrigeration compressor / France "Taikang" Hermetic Refrigeration Compressors | |||
Security Devices | Power overload, leakage, grounding, over-temperature protection (with voice prompts), fast fuse, compressor over-voltage protection | |||
Standard | Resistant to high and low temperature heat tempered glass hollow glass windows: 300 × 200 (mm), a lighting, , the two sample holder, | |||
Power supply | ACø220V·50HZ/380V·50HZ | |||
Ambient temperature | 15°C~+30°C ≤85%R.H |
Chamber Summary:
Easy To Operating Performance of climate temperature humidity test
chamber for electronics, plastic products, electrical appliances,
instruments, metals, chemicals, building materials, food, vehicles,
aerospace, medical ... Products of quality.
Easy To Operating Temperature Humidity Chamber specially test
various materials resistance to heat, cold, dry, wet performance
Working principle
Easy To Operating Temperature Humidity Chamber (heating and
cooling) and humidification is composed of two parts. Through
installation in box within top Department of rotating fan, will air
row into box achieved gas cycle, and balance box within of
temperature, and humidity, by box built-in of temperature, and
humidity sensor collection of data, biography to temperature, and
humidity controller (micro information processing device) for edit
processing, issued thermostat adjustable wet instruction, through
air heating unit, and condensation tube and sink within heating
evaporation unit of common completed.
Control
English LCD display LCD touch-panel, the screen on the input data,
and programmable temperature and humidity, backlight adjustable 17,
curve, curve of setting/display value. Can display a variety of
alerts, failure occurs through the screen display, eliminating
failures, eliminate misuse. Multi-PID control functions,
sophisticated monitoring functions, and the data displayed on the
screen.
Standard Features:
GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM D1735 IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30IEC68-2-03 EIA - 364-31C EIA - 364-59
Please feel FREE to contact us if you have any needs.