304 Stainless Steel UL2054 Lithium-Ion Batteries for Cellular Phones-Heavy Object Shock Test Machine

Battery Impact Testing Machine.

1. Purpose / principle:
The test sample battery shall be placed on a flat surface, and a rod with a diameter of 15.8 ± 0.2mm (5/8 inch) shall be placed crosswise on the center of the sample. A 9.1kg or 10kg weight is dropped onto the sample from a certain height (610mm or 1000mm). When a cylindrical or rectangular battery is subjected to an impact test, its longitudinal axis should be parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the rectangular battery is perpendicular to the steel column, and the largest surface is perpendicular to the impact direction. Each battery receives only one impact test.

2.Test standard:

UL1642, UL 2054 "lithium battery standard"
UN38.3 Standard Test Regulations for Lithium Batteries and Battery Packs
IEC62133GB / T 18287-2013 "General Specification for Lithium-Ion Batteries for Cellular Phones-Heavy Object Shock Test"
GB 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
GB-31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
QB / T2502 "General Specification for Lithium-Ion Batteries"

1) Falling ball weight: 9.1kg ± 0.46kg (20 ± 1 pound) and 10kg
2) Impact height: 610 mm and 1000 mm (limit position can be freely adjusted) Test maximum height of 1000 mm.
3), height display: display through the altimeter, accurate to 1mm
4) Impact method: The falling ball is lifted to a certain height and released, and the falling ball falls freely in the vertical direction without tilting or shaking;
5) Horizontal bar: 15.8 ± 0.2mm (5/8 inch) steel rod
6) Material of inner box: SUS # 304 stainless steel plate, thickness 1mm, iron-fluoride adhesive tape is attached to 1/3, high temperature resistance, corrosion resistance, insulation easy to clean
7) Material of outer box: cold-rolled plate baking paint, thickness 1.5mm
8) Exhaust vent: located on the back of the cabinet, 120mm diameter, 110mm diameter exhaust guide tube, convenient to connect laboratory high-power exhaust fan;
9) Remote control distance between controller and test box: 10m
10) Maximum measurable battery size: 1000 * 600 * 500mm
11) Box door: single-door double-layer door, open tempered glass observation window, cold-handle door lock, box door with silicone foam pressing bar
12) Up and down impact surface: stainless steel plate
13) Visual window: 300mm * 300mm
14) Use power: 1∮, AC220V, 3A
15) Power supply: 700W
16), weight (about): about 250kg
17) Volume (approx.): 700X800X1650mm (length X width X height, without controller)

Specification

Introduction

Testing battery sample should be placed on a flat surface and place a bar with a diameter of 15.8mm (5/8 inch) across the central position of the sample. A weight of 9.1kg or 10kg±0.46kg (20±1lbs) falls on the sample from a height of 1000±25mm.


Meet the standards:

IEC62133, UN38.3, UL1642:1995, UL2054:1997, GB/T18287-2000, GB 8897.4-2002 and other standards.

Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978.

Manufacture Base in Dongguan

We own sophisticated and advanced technology in producing environmental test chamber and mechanical test machine. For example, temp and humidity chamber, thermal shock chamber, high temp oven, UV weathering test chamber, xenon test chamber, rain test chamber, dust test chamber, altitude chamber, salt spray tester, salt spray combined temp and humidity chamber, walk in /drive in test chambers, tensile testing machine, vibration test machine, vibration test machine combined temp and humidity chamber, drop impact tester, transport simulation test machine... All machines are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.

Under hard work of our develop&research department and design department, we are capable to manufacture customized machine shell, inner system, test standards as customers’ requirements. Moreover, Our equipment passes various international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Our factory accept TUV inspection annually and are recognized as High-tech enterprise by Government.

Now, we have one main manufacturing base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. In Dongguan factory, we have a environmental laboratory and a physical laboratory on the third floor for customers’ quick examination of our quality. Furthermore, to satisfy customers’ urgent needs, we have full stock of climatic chambers.

Metal Department

In production department, most technicians have over 10 year’s working experience in metal shaping, welding, accessories assembling. Equipped with imported compressor (BOEK/TECUMSEH) and electronic components (ABB/Siemens/

Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips ), the life service of OTS machine can operate over 10 years. We will test the machine for 3~5 days before shipment and provide 14 months’ warranty with a lifetime maintenance service.

Test Area

Our cooperation culture：To be the TOP10 exporter in this field. TOP10 not only concludes sales amount, but also express our goal to provide TOP quality product and service to customers around the world. As an enterprise, we have our social responsibility to present the best ‘Made-in-China’ to the global market.

With the exquisite manufacturing process, an innovative development and research team, a professional sales team and excellent after-sale service, OTS is ready to take part into international market and set an example in this field.