Stable Working Altitude Test Chamber Customized Color 0.7C - 1.0C/Min Cooling Rate

Stable Working Altitude Test Chamber Customized Color 0.7C - 1.0C/Min Cooling Rate

Introduction:

Customized Available Altitude Test Chamber Manufacturers,Altitude Chamber are used in different industries like the instruments and meters, electrical products, materials, spare parts, equipment, etc, but mainly in aviation, aerospace, information, electronics and other industries. This machine can be operated at a low pressure, high temperature, low temperature, under the effect of single factor or multiple conditions at the same time. Simulation of high-altitude conditions like might be found in mountainous regions. Test for electric performance parameters of the specimen.

Technical parameters:

Standard configuration

Two sample holders; an observation window; φ25 or φ50 cable hole.

Optional parts

Communication interface RS232 or RS485, logger, micro printer, remote temperature and humidity control system (including printers, communications software, computer), mobile casters.

Structure

Overall structure: the new design is easier to operate and maintain.
Water and electricity system is separated;
External humidifying design;
Three levels of overheat protection, easy access for refrigeration servicing, etc.

Material

Tecumseh, Bock Compressor;
High quality electronic components (DANFOSS, ALCO, RANCO, SPORLAN, SAGINOMIYA, Schneider solenoid valve)

Standards Implemented and Met

B10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode

Safety devices

1. Power owed to reverse protection
2. No fuse switch
3. Dry compustion prevention switch
4. The water protection switch
5. Over-temperature protection
6. Motor overload protection
7. The high-pressure compressor protection
8. The overheating protection of compressor
9. The over-current protection of compressor
10. The over-current protection of vacuum pump

Features

1. Temperature: -70 ~170ºC
2. Altitude: ground to 100,000 feet
3.External pressure type box body structure and stainless steel tank design, rational air circulation system and scientific layout of heating, refrigerating system.
4.Adopts international brand of imported parts for cooling system to improve operation reliability
5. High precision and stable performance with touch screen controller, friendly Man-Machine interface.
6. Multiple layers of safe device , easy for maintenance.
7.Viewing window and cable ports are available.
8. Vacuum pump sized for climb/dive rate required by application

Advantage

Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE

Customer Support Services

Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

Our Company

OTS Instrument Co., Ltd.
was established in 1978, with over 35 years’ history, is one of the leading companies solely dedicated to manufacture of environment,class,mechanics,package testing equipment...
(such as constant temperature and humidity chambers, environmental chambers, thermal shock test
chambers,fast change rate chambers, yellowing resistance aging test chamber, salt spray chamber,
tensile testing machine, universal testing machine,carton compression testing machines, bursting
strength testing machine, vibration test, etc.) ...
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement. with offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms: ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...

1. Do you offer after-sales service? How can I ask for that? And how about the warranty?

Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.

If your machine doesn’t work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.

2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery

time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider

making a special arrangement for you.

3. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized

machines according to your requirements. And we can also put your logo on the machine.

4. Do you have a branch company or service office in my country?

We have offices in the belowing:

The US Office: XIN BAO INSTRUMENT (US) CO.,LTD

Tel: 001-612-402-1218

Vietnam: XIN BAO INSTRUMENT INDUSTRY(VIETNAM)CO.,LTD

Tel:+(848)66764653 Fax:(+848)37527888

Address:248 no.1A Road,An Lac-Binh Tri Dong Residence,B Ward, Binh Tan Disrtict, HO Chi Minh City, Vietnam.

Singapore Dealer: Surveillance Inspection & Testing Services Pte Ltd

Tel: (+65) 96857857

Address:No. 5 Jalan Kilang Barat #08-06 Petro Centre Singapore, 159349

Italy Dealer :AMSE SRL

Tel:+39-011-2730000

Address: Strada della Cebrosa 86, 10156 Torino Italy

Taiwan : TAIWAN XIN BAO INSTRUMENT CO.,LTD

Tel:04-24731563 Fax:04-23804092

Address: No. 551-1, 4, Central Road, Taichung City, Taiwan

5. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.

Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978.

Manufacture Base in Dongguan

We own sophisticated and advanced technology in producing environmental test chamber and mechanical test machine. For example, temp and humidity chamber, thermal shock chamber, high temp oven, UV weathering test chamber, xenon test chamber, rain test chamber, dust test chamber, altitude chamber, salt spray tester, salt spray combined temp and humidity chamber, walk in /drive in test chambers, tensile testing machine, vibration test machine, vibration test machine combined temp and humidity chamber, drop impact tester, transport simulation test machine... All machines are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.

Under hard work of our develop&research department and design department, we are capable to manufacture customized machine shell, inner system, test standards as customers’ requirements. Moreover, Our equipment passes various international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Our factory accept TUV inspection annually and are recognized as High-tech enterprise by Government.

Now, we have one main manufacturing base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. In Dongguan factory, we have a environmental laboratory and a physical laboratory on the third floor for customers’ quick examination of our quality. Furthermore, to satisfy customers’ urgent needs, we have full stock of climatic chambers.

Metal Department

In production department, most technicians have over 10 year’s working experience in metal shaping, welding, accessories assembling. Equipped with imported compressor (BOEK/TECUMSEH) and electronic components (ABB/Siemens/

Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips ), the life service of OTS machine can operate over 10 years. We will test the machine for 3~5 days before shipment and provide 14 months’ warranty with a lifetime maintenance service.

Test Area

Our cooperation culture：To be the TOP10 exporter in this field. TOP10 not only concludes sales amount, but also express our goal to provide TOP quality product and service to customers around the world. As an enterprise, we have our social responsibility to present the best ‘Made-in-China’ to the global market.

With the exquisite manufacturing process, an innovative development and research team, a professional sales team and excellent after-sale service, OTS is ready to take part into international market and set an example in this field.