Anti--Static Package iPhone 8 iPhone LCD Screen LCD Touch Display
Only fit for iPhone 8 (A1863, A1905, A1906) Not compatible with any
other models.If you not very sure the phone model, please check the
rear of the phone
Should transfer home button with fingerprint sensor, front camera,
ear speaker and silver metal plate from your old phone
The screen with three ribbon flex cable .Pls connect the front
camera flex cable first,make sure the direction of the cable is
correct ,After connect the front camera cable firmly ,then connect
other two flex cable
Tips: moderately curved the metal plate on the screen when lock
screws, it can avoid the flex cable pressed to back light too
tight. otherwise it can appear dark in some part of the screen
Quality Guarantee: All screens are full tested and 100% in good
condition before shipping. We are responsible for any damage during
transit or quality problem.contact us if any need
- What's in the box:1 x LCD For iPhone 8
|Quality||Original/ AAA OEM|
|QC||Strictly test one by one to make sure all the goods is best
quality, Each item has been checked and in good condition before
|Usage||This LCD Display Screen Replacement is used for replacing the
exsiting damaged amaged, cracked, bleeding or dead pixels screen of
|Shipping||DHL, UPS, EMS and FedEx, express could arrive in 3-5days, EMS cant
Anti--Static Bags,Bubble Bag with Foam Box, can package as
The new screen replacement have only two flex cables, you should
transfer the front camera sensor flex cable from your old screen.
So total three flex cables.Please contact us without hesitate when
have any problem before returning this item, as long as the item
cannot work, refunded is supported.
1. When disassembling your iPhone8, please don't just pull the
screen out directly.The ribbon cable of the "Home" button is
connected to the screen.
It is very flimsy You should open up thescreen a little,disassemble
the ribbon cable and then get the screen out.
2. When install the screw of the camera, please notice that the
long screw must be at the top left corner, or it will damage the
3. If the phone is deformed, it is easy to get stuck when
installing, please do not press down directly, it's easy to burst
the screen, you should press it downward by flat pushing.
4. The screen belongs to fragile items, so please be careful when
you install it in case it break.
If your phone meet some problems like cannot turn on,touch
insensitive, flash, lines on screen etc, please follow below steps:
1. Please check the LCD to make sure the flex cables are in good
condition and there are no debris on the connectors.
2. Disconnect and reconnect the flex cables from the motherboard
3. Then Reboot: Hold buttons (Home, Up volume, and Power button)
untill the phone switch down and then switch up again.
4. Make sure for iPhone 8 IOS is upgraded to the latest version.
1. Watch the install tutorial video
2. Disconnect the battery cable or power off your phone before
3. Beware of the sensitive and frangible flex cables, and screws
should be on the right position.
4. Test screen functions by connecting the cables to motherboard
before installation(a clink sound refers to installed well).
5. If there are any problems, please feel free to contact us. We
will do our best to solve your problem asap.
We supply all kinds of mobile phone accessories, such as flex
cable, housing, case, LCD, middle frame, battery for iPhone, iPad,
Samsung, Sony, Motorola, HTC, Blackberry, LG, HUAWEI, Xiaomi and so
We also provide refurbishment and maintenance services for mobile
phone Lcd screens.
Welcome to contact us!