Industrial Diesel Screw Compressor / Rotorcomp Portable Diesel Air Compressors

Two Stage High Pressure 1200Cfm 365Psi Diesel Portable Air Screw compressor

Shanghai Rotorcomp's fully implemented Quality Management and Environmental Management systems in the design and manufacturing of these units fulfill the requirements of ISO 9001 and ISO 14001.
The range has also been tested / given the certificate tested according to ISO 1217.

The most efficient wheeled Diesel compressor, Deutz, Ctapillar, Cummins diesel engine, less10-15% diesel consumption than the traditional model. More flexible in various working conditions for mining, road construction. Sand blasting.

Advantages of Diesel Portable Screw Compressor:

1. Two-stage screw block is patented;
2. Designed for a maximum pressure of 40 bar;
3. Two-stage compression; Deutz, Cummins, and Yuchai World well-known engines
4. SKF bearings, direct drive, no noise gears;

Application of Diesel Portable Screw Compressor:

Shanghai rotorcomp diesel Portable/Mobile screw air compressor is widely used in mines, water conservancy, transportation, shipbuilding, urban construction, energy, industry and other industries.

Diesel Portable Compressor Features:

Diesel portable screw air compressor is widely applied in the industries, such as, road, railway, mine, water conservancy, shipbuilding, urban construction, energy and war industry, etc.

Shanghai Rotorcomp diesel portable screw air compressor is efficient and reliable, with complete varieties. Discharge quantity covers 33m3/min and the discharge pressure is up to 3.5MPa at maximum.

Our advantages:
1,A high-efficiency cooling system
ensures the compressor operates in the optimum operating mode. There are independent oil, water and air cooling systems. Equipped with a fan of a larger diameter, adapted for a cold and hot climate.

2,Triple filtration of air
The patented cyclone air pre-filter, which filters more than 90% of dust and impurities, increases the service life and the replacement of the air filter by 5 times. The cyclone air filter filters residual dust and protects the compressor, the filter cartridge allows safe maintenance of the air filter without stopping the compressor. This system provides continuous operation in desert conditions or large dustiness.

3,Low temperature starting system (option)
The water pump pumps the coolant from the engine into the heat exchanger. The fuel pump pumps fuel from the tank into the combustion chamber, which ignites. At the same time, heat transfer takes place continuously, which increases the temperature of the coolant and oil, as well as the temperature of the compressor itself. This ensures the start of the diesel engine in the frost or in the highlands.

4,Additional cooler (option)
Provides a compressed air temperature at the outlet of 15 degrees less than the ambient temperature.

Triple oil cooling system from compressed air
Reduces the oil content in the oil separator with unstable oil supply. Always saves the amount of oil in the exhaust compressed air no more than 3 ppm. Clean air is necessary for the safe operation of equipment in which compressed air is used.

Microprocessor control system
The simple and convenient interface of the microprocessor control system allows you to monitor the speed during operation, compressed air pressure, oil pressure, outlet air temperature, coolant temperature, fuel level and other parameters. Has the functions of self-diagnosis, alarm and stop. Simple management ensures safe operation without the participation of personnel. An additional option is a remote network monitoring system that allows monitoring the operation of compressors remotely.

Screw air compressor main spare parts configuration:

Shanghai Rotorcomp Screw Compressor Co., Ltd founded in 1999, our company was a manufacturer of piston air compressors from 1985-1999. After 2000 our company headquarters moved to the international metropolis Shanghai and focused on screw air compressors, pressure vessel, refrigeration dryer, adsorption dryer and air filters with the support of Rotorcomp Verdichter Gmbh in German.

Shanghai Rotorcomp Screw Compressor Co. Ltd., Shanghai Ziqi Container Co.Ltd. have been cooperated with 2010 Beijing Nankou Railway Transit Machinery Co. Ltd., which belongs to China CNR Corporation Limited, as the strategic cooperation partner.

The Beijing Nankou company has processing equipment more than 100 sets, including large-scale precision equipment 90 sets and imported equipment 70 sets. Such as Hardinge double-ended grinder, Toshiba horizontal machining center, BW CNC vertical and horizontal machining center, Holroyd rotor profile grinder and Zeiss 3D measuring machine.

From 2017, we successfully develop the new generation oil-free air compressors with the ISO9001 certificate, ISO14001 certificate, energy-saving product certificate, OSHAS (Occupation Safety and Health management System) certificate, vonTUV certificate and CE Certificate. According to the Standard European Din40080, our air end and air compressors have won the praises of the customers over 45 countries worldwide.

Followed the principle and policy of " First-class Quality, First-class Service" Shanghai Rotorcomp insists on improving ourselves into a first-class supplier for the air compressor.