Add to Cart
Sealant-spreading machine LJST03
APPLICATION
This equipment was designed by advanced technology from abroad and
inside of China. It is special equipment used for spreading the
two-component polysulphide glue and/or two-component silicone
structure glue for the aluminum type insulating glass or curtain
wall glass.A and B pump adopt Korea brand HASCO.So it can ensure
the reliable working-effect.
Special and convenient mixed device can ensure the high quality
mixing of the two-component polysulphide glue and/or two-component
silicone structure glue. This equipment is featured by uniform
mixture and continuous stability of extruded glue, good spreading
effect and high production efficiency.
Main feature
Technical data
Working air pressure | 0.3-0.6MPa |
Sealant spreading pressure | 15-20MPa |
Sealant volume | 4L/min |
Diameter of A/B sealant | 570mm/280mm |
Sealant spreading air pressure ratio | 50:1 |
Mixed rate | 6:1-14:1 |
Air supply | Flow 0.8m3/min |
Air pressure | ≥0.8MPa |
Overall dimension | 1100*950*1630mm |
1,Min motor
Adopted Korea HASCO to improve equipment efficiency.
2,B motor
Adopted Korea HASCO to improve equipment efficiency.
3,Sealant gun
We adopted the Sealant gun from Korea HASCO.
Stainless steel mix pipe and hybrid mandrel,easy to clean glue.
4,Proportional pump & Safety valve
Special check valve in the pump to make sure extrude glue fluently and avoid incomplete mixing.
5,Glue bucket
Gluing evenly without bubbles.