6.5 Liter 180W Ultrasonic Cleaning Machine Stainless Steel Temperature Setting

6.5 Liter 180W Stainless Steel Ultrasonic Cleaning Machine Hot Water for Sale

What is Ultrasonic Cleaning?

Ultrasonic cleaning uses ultrasonic energy in an immersion cleaning tank to assist in the removal of tenacious or stubborn soils from parts. An ultrasonic system always consists of at least three main components:

1. A tank to hold the cleaning fluid and the dirty parts

2. A generator to transform the line voltage into an ultrasonic signal

3. Transducers to convert the ultrasonic electrical signal into mechanical energy

How to choose an ultrasonic cleaner ?

Many first time customers of ultrasonic cleaners are unsure what equipment will work best for them. Selecting the right equipment is really just a matter of applying the correct criteria.

How big a tank do I need?

It might seem that all you need to do is measure your largest part and size your tank accordingly. Actually, a better route is to take a look at all your parts: If you are cleaning the same thing in every batch, or only deal with small parts, the choice is easy. But if you have a wide variety of part sizes and geometries, take a look at the mix. Are there just one or two large parts, and many smaller ones? It may not make sense to buy a larger system just for a few parts. Tank pricing rises rapidly with size.

Do I really need heat?

Unless you will always fill your tank with hot water, and refill it with hot water and cleaning chemistry every time it cools off, yes, you need heat. Ultrasonic energy moves best through water at a temperature betwwen 140 and 170 F. In addition, hot water helps dissolve many soils, further enhancing parts cleaning.

Do I really need a parts basket?

Maybe not. Remember that you don't want the parts resting on the bottom of the tank. This inhibits the transmission of energy through the water, as the transducers are mounted on the bottom. Some people with larger parts just make a simple stand or spacer to keep their parts off the bottom and it works fine.

Advantage:
Ultrasonic is widely used throughout industries to remove difficult contaminants from the parts during or after manufacturing process which might require a stage of cleaning before the next process. In general, if an item can be cleaned with liquid, it can be cleaned much faster and more thoroughly with an ultrasonic cleaner. Compared with traditional solvent/scrubbing, our ultrasonic cleaners:

1. Reply your enquiry in 10 working hours.
2. No MOQ request
3. OEM and ODM is available.
4.Professional technical support
5.High quality and competitive price

All of our ultrasonic equipment carries two certifications : CE, RoHS

We are been Manufacturers and we have factory in Shenzhen . We are happy to share our experience in cleaning with you, our customer. Just send an email or call us toll free and we will do all we can to help

Company Profile

Shenzhen Dekang Cleaning Electronic Appliance Co.,Limited is a comprehensive new high-tech enterprise whichspecialized in the research&development, productction and sale of household,commercial,laboratorial,industrial high-power ultrasonic cleaner ect.Especially,we also can customize non-standard products to meet customer

Our R&D department is make up of five sections:mechical structure design section,electronic design section,software developing section,graphic design section,testing section.Everyone here are excellent engeineers who have at least 5 years' R&D experence.They are good at introducing most advanced technologies in the world and make some innovative improvement.

Now our products are composed of household ultrasonic cleaner,mutifunctional aweep ultrasonic cleaner,power adjustable ulltrasonic cleaners,smart dual-bands ultrasonic cleaner,dihital ultrasonic cleaner,mechanical ultrasonic cleaner,industrial ultrasonic cleaner,submersible ultrasonic transducer etc.All of our standard products have achieverd most internation standards,such as CE certification,ROHS certification,FCC certification etc.


Application

Industrial ultrasonic cleaner are suitable to clean irregular and complex specialized instruments,components and PCBs of sundry shops,workshops,factories etc.

Specification

How to use DeKang ultrasonic cleaner ?

1. Fill the stainless steel tank with cleaning solution; Plug the power lead into grounded outlet; After power-on, the temperature displays the actual environmental temperature, LED displays 3 minutes (default ultrasonic time).

3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press and hold there means time will increase or decrease by 10℃ . Usually, the best cleaning temperature is within 40℃ to 60℃.

2.Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will increase/reduce by 10mins continuously. The cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the timer runs up, press “Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour

4. After time and heat setting, press “Heating” or “ultrasonic” button to start both function. Press “Heating” button again, the heating function will stop. The same for Ultrasonic Function.

6. Drain: press the “drain” button to open or close the automatic valve. The automatic valve will close a certain time (10 minutes in default) later after drain.

7.Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.

NOTE: Do not pour water out until it’s cooling, Hot water will hurt you and damage the machine itself.

Delivery

3 days after confirm the payment ,Express Including YOUSU,UPS,DHL,FedEx,Air transportion,Sea transportation,Also you could ask your courier to pick the goods.

Shenzhen DeKang Electronic Cleaning Appliances Co.,LTD is a comprehensive new high-tech enterprise which focuses on the research & development, production and sale of commercial, household, industrial high-power ultrasonic cleaners etc. Especially, we also can customize non-standard products according to customers’ requirements.

Our R&D department can be divided into five sections: mechanical structure design section, electronic design section, software developing section, graphic design section, testing section. All members are excellent engineers who have at least 5 years’ R&D experience. They are good at introducing most advanced technologies in the world into our products and make some innovative improvement. Especially they also pay much attention to cooperation with some institutes or excellent professors of colleges in China. Besides, we also spend a lot of money on purchasing new advanced equipments for R&D and production of new products every year.

Now our products are composed of household ultrasonic cleaners, smart ultrasonic cleaners, digital ultrasonic cleaners, mechanical ultrasonic cleaner, industrial ultrasonic cleaners etc. All of our standard products have achieved most international standards, such as CE certification, RoHS certification, FCC certification etc. Besides, Dekang also have strict examining procedures for controlling the quality of non-standard products.

As to DeKang’s VIP customers, they can get latest product information and free samples of our new products which cost less than a certain amount when they just appear on the market. Besides, Dekang provides 1 year’s warranty for all of our products. Any defective products may be replaced by new products unless they are broken intentionally. Moreover, Dekang launches several online inquiry platforms and technical discussion forum. Any customers can make an inquiry or ask technical questions online. Especially, customers can follow Dekang on Facebook, Twitter, VK, Linkedin, Google+, Youtube etc.

Customer-oriented! Professional! Good faith! Continuous innovative! Rigorous!

Dekang always pays attention to cooperation with partners, and tries to make a win-win situation with them. Be serious with their requirements, spare no effort to satisfy them. DeKang, your super partner!