Steel Wire Armouring Machine 48+48 Nos Bobbins DIN400 0.8-4.0 mm
1. Equipment use
This machine is mainly used for cable single or double steel wire
armoring
2. The main technical parameters
2.1 The maximum outer diameter of the core before mounting: φ60 mm
2.2 Steel wire diameter: φ0.8-4.0 mm
2.3 cage speed range: 23.83-53.01r/min
2.4 Line speed range: 3.981-30.073m/min
2.5 Wire armored pitch range: 75.1-1262mm
2.6 Taping speed: Stepless adjustable
2.7 Cage inner pay-off specifications: DIN400
2.8 Central pay off specifications: PN2500-PN1600
2.9 Cage outer pay-off specifications: PN2500-PN1600
2.10 Traction device dia: 2000mm
2.11 main motor power: 55kW
3. Component composition
3.1 φ2500 gantry pay-off device 1 set
3.2 48/400 Main cage 1 set
3.3 die holder (front cage) 1set
3.4 taping device 1set
3.6 meter counter 1set
3.7 Double wheel tractor 1set
3.8 φ2500 gantry take-up frame 1set
3.9 Mechanical transmission system 1set
3.10 electric control system 1set
3.11 Security fence 1set
4. Structure description and technical parameters of the main
components
4.1φ2500 gantry pay-off frame
4.1.1 pay-off bobbin specifications PN1600-PN2500
4.1.2 Maximum load weight 15ton
4.1.3 pay off use thimble end axis, can up and down separately at
same time.ensure height adjustment,to clamp and relax the pay off
frame.
4.1.4 The clamping, relaxing and lifting operations of the reels
are performed by the touch screen and physical buttons in both
directions
4.1.5 Lifting and clamping limit protection device.
4.1.6 Clamp type mechanical frictional tensioner, symmetrical
friction plate adjusts release tension
4.1.7 The pay-off frame moves as a whole to ensure that the cable
is always in the center of the production line
4.1.8 The whole machine is managed by Siemens PLC
4.2 48/400 main cage
4.2.1 The main cage gearbox is six-speed gearbox.use Hard tooth
gear. left and right turn and space function.
4.2.2 The twisting cage is composed of a gearbox, a seamless hollow
shaft, a winch, a wire rack, and an air brake device. Each section
of the host is supported by a multi-section tugboat with a seamless
hollow shaft, which has good rigidity and stable operation. After
the winch, a new type of gear back-twist mechanism is installed.
Through this mechanism, back-twist is achieved, which has the
characteristics of small gear clearance and low failure rate..
The use of tension band to adjust the tension in the cage wire rack
can make the tension of the core wire released on each cradle be
stable and balanced; the top of the wire coil adopts the thread
structure; the screw sleeve is equipped with a rolling bearing; the
rolling bearing supports the top; the threaded sleeve stretches
freely and is installed; With locking mechanism, the upper and
lower thread plates are convenient and quick.
4.2.3 Each winch is connected with the main shaft through the
flange plate. The main shaft is made of large-diameter seamless
thick-walled steel pipe. The overall rigidity is good, the
coaxiality of the winch is high, and the balance operation of the
winch is high;
4.2.4 All wire nozzles are made of tungsten steel.
4.2.5 The main cage brake adopts plane air brake
4.2.6cage speed range 23.83~53.01r/min
4.2.7armouring pitch 75.1~1262mm
4.2.8cage inner pay off size DIN400
4.3 common taping head:
4.3.1 Applicable taping reel diameter × aperture × width
ϕ400✕ϕ52✕(20-60)mm
4.3.2taping speed range Stepless adjustable
4.3.3taping pitch Stepless adjustable
4.3.4 Suitable for winding non-woven materials, wrapping tapes and
other materials
4.5 Mechanical meter counter
4.5.1 meter counter wheel circumference 500mm
4.5.2 max length meter counter 9999m
4.5.3 Vertical, mechanical meter counter.
4.6 2000wheel traction
4.6.1 traction speed rang 3.981~30.073m//min.
4.6.2 Traction speed series 36 level
4.6.3 traction Dia 2000mm
4.6.4 It adopts 36-level traction gearbox and the internal
hard-tooth surface grinding gear has huge output power and stable
traction.
4.6.5 The traction wheel is made of steel and it is strong and
wear-resistant. The driving gear is made of steel and it has a
large bearing capacity and is not easy to wear.
4.6.6 The integrated welding base is used to facilitate
installation and increase the stability.
4.6.7 is a two-wheel double-drive traction.