SS304 Hexagonal Perforated Meta Easy Fabricate , Hexagonal Steel Mesh Provides Security

SS304 Hexagonal Perforated Meta Easy Fabricate , Hexagonal Steel Mesh Provides Security

The Product Description:

Hexagonal-hole perforated metal with high tensile strength and good ventilation is very popular.

Hexagonal-hole perforated metal is a sheet or coil of material which is made of carbon steel, aluminum, stainless steel and pre-galvanized steel. Its holes pattern is staggered row. Hexagonal-hole perforated metal is often used in architectural applications. Such as building walls, architecture fence and furniture decoration.

If you have specific needs, please don't hesitate to contact us, we will try our best to meet your requirements.

Hexagonal Perforated Metal Materials:

Based on the intended use for the product, you can pick from a number of different materials that each has unique characteristics to offer.

Stainless steel, copper, titanium, aluminum, cold rolled steel, brass, Galvanized steel, and more are all available from Wannuo Wire Mesh.

SS304: The most common type of stainless steel, this chromium and nickel alloy has a good level of workability.

SS304L: Contains less carbon than SS304L, which makes it softer and easier to weld

Features of Hexagonal Perforated Metal:

• Highest percentages of open area
• Variety of gauges and materials
• Many patterns, materials and gauges
• High strength-to-weight ratio
• Economical
• Versatile
• Aesthetically appealing
• Allows for passage of air, light, sound and gases
• Pressure equalization or control
• Provides security
• Easy to fabricate

Hexagonal perforated metal sheet:

Note: can be customized according to the given specifications and colors from clients. More requirements and specifications, pls feel free to contact us.

Applications for Hexagonal Perforated Metal:

• Screens
• Guards
• Diffusers
• Privacy panels
• Facades
• In-fill panels
• Trash receptacles
• Benches
• Drain covers

It would be impossible to list all of the potential uses for this versatile product. However, some of the most popular applications include benches, facades, screens, guards, privacy paStainless steel, copper, titanium, aluminum, cold rolled steel, brass, Galvanized steel, and more are all available from Wannuo and more.

We provide a brief guide to help you understand the nomenclature :

Material

We can provide you the following material :Stainless Steel, C.R. Material, H.R. Material, Galvanized, Aluminum, and all types of metal.

Specification

We can manufacture a wide rang of thick sheet verifying from 0.35 mm to 3 mm thickness Sheet width maximum 1200 mm. Length is the overall measurement of the long side of the sheet. Width is the overall measurement of the -short side of the sheet. The standard sheet size is 1000 mm × 2000 mm. and 1000 mm × 2500 mm. The coil width 1000 mm is also available. We also can process the special product for your requirement if you tell us the exact specification.

The hole shape

Round, square, long round, triangle, scale, diamond, oval, hexangular, slot, etc.

Aperture

In general it is advisable to use a hole size larger than the material thickness. The closer the hole size and material thickness come to a 1 to 1 ratio, the more difficult and expensive the process is. Dependent on the material type, smaller hole size to material ratios can be achieved. The minimum diameter we can fabricate is 0.8 mm to 4 mm thickness. If you require a die that isn't already in our die bank, our experienced tool and die makers can quickly make exactly what you need at a reasonable cost.

Pattern

We have tooling available for many different hole patterns and shapes. It is more economical to choose one of the available patterns, although special hole sizes and patterns can be accommodated at additional cost. Pitch

Pitch

Hole center is the distance from the center of one hole to the center of the nearest hole in the next adjoining row.

Open area

Open area is the total area of the holes divided by the total area of the sheet and is expressed as a percent, Keep in mind that punching holes in a material add stresses that can result in distortion of the product. The higher the open area, the more material distortion takes place, especially when the perforated pattern is bordered by margins on all four sides. But these distortions can be removed by our special in house leveling process.

Margins

Margins are the blank area along the edges of the sheet. If you want the product with special margins, you should provide the width of each margin on all four sides (measured from the edge of the sheet to the edge of the first hole).Manufacturing considerations may affect margins. If the margins requested are not possible. We will replace it with the similar products as your consideration.

Tolerances

There are tolerances on thickness, pitch, openings, flatness, and shearing for perforated products. You should specify a specific tolerance, so we can give you a precise product. If not, we will according to standard tolerance.

Anping Wannuo Wire Mesh Co., Ltd. is located in Anping county Hebei province which is the largest wire meshes manufacturing base and have the noticeable fame of " The hometown of wire mesh " in China. Perforated material is our key product. We are acknowledged as one of the leading manufacturers in this industry due to our high quality products, reasonable price as well as our considerate service.

Quality is a state of mind. The automotive CNC perforating machine and an extensive range of die in stock enable us to manufacture the perfect perforated products that match the strict quality requirements of international market which has earned us the reputation of being a quality -oriented company.

Our company has introduced the advanced "etching" equipment in addition, this equipment can make the hole diameter up to 0.08mm, which meet your requirement for more high-accuracy products.

Perforated material is widely used as Architecture, Noise control, Filtration, Automotive & Transport, Electronics, Agriculture equipment, Pharmaceutical, Audio because of the feature of controlling the passage of air, light, liquid, solids, heat and waves.sell well All over the world, including UK, Norway, Netherland, Cyprus, USA, Canada, Mexico, Ecuador, Brazil, South Africa Indonesia, India, etc.

Customer's satisfaction is our priority. Our staff is committed to a policy to ensure a continuous improvement to the product. If you have any special requirement for your products, please tell us. Our experienced die experts will work closely with you to design the product for your criterion. We have implemented the ISO9001 Quality and Management System, obtained the International Certification. Authentication.

In the past years, we have served a wide variety of markets, and provided creative solutions for our customers. Our work team has the knowledge, experience and dedication to successfully meet your perforating needs.At WANNUO WIRE MESH, we’re all about three things: Quality, Speed and Reliability.