Remote Control LED Strip Light Controller , RGBW LED Controller With Group Dimming Function

Remote Control LED Strip Light Controller , RGBW LED Controller With Group Dimming Function

SUMIRIZE:

DM9124 is the 4 channels product of 2.4GHz RF Wireless LED Dimmer Series. It can be used for different circumstances with 1-4 channels for option. 2.4GHz is the best frequence to realize wireless LED lighting controlling which is under the limit of civilian wireless devices. It can reach Max 30 meters controlling distance in the open space. It can go cross normal obstacle and satisfy common use in LED lighting. Much more easy to install and operation, beautiful appearance and rich function, this products will be your best choice of LED wireless controller.

1), 2.4GHz high frequence control signal can ensure stable wireless remote control effect and anti-interference ablity.

2), The receiver can connect 4 channels output load. Each output interface can stand 5A current, Max output current load is 20 Ampere.

3), With touch control function, user can adjust the light colors and brightness remotely.

4), Screw terminal of receiver and AAA battery of remote controller realize easy installation and more universal in in the world.

5), Grouping dimming function can satisfy much more circumstance as personal needs.
6), With independent control according to different groups, it can realize not only one to one controlling but also one to many and many to many controlling.
7), Many pre-instal models creat different color changing effect while changing speed is adjustable.

8), Custom-made is available and 3 years warranty.

Tech-parameters:

Specifications of LED RF Wireless Controller Series:

Function Instructions:

NOTE:

1), Turn ON when click ON, Long press ON to warm white directly. Shut Down when click OFF.

2). Color Wheel Touch Controller: When lighting, touch anywhere on color wheel to the color you need. Move touch the color wheel to gradule color changing.

3). Brightness adjustment: Touch Brightnees+ to increase the brightness and touch Brightness- to dim the lights.

4). Pre-installed Mode Changing: Click Mode to change the different pre-installed modes. Adjusting the speed of modes changing by click Speed+ and Speed-.

5). Grouping control fuction: Separate receivers into different groups through Multiple pairing. Press differen boot keys which numbered 1,2,3,4 within 5 seconds after the receiver powered on, you can divide the receivers into different groups. There is only 4 groups in a remote controller and no more than 4 receivers can be in the same group.

6). Through paring, can realize one controller controlling one receiver or one controller controlling max 16 pieces receivers. And several controllers controlling one or sevral receivers is available.

Wiring Diagram:

Operating Instructions:

1. Please offer the receiver a input voltage of DC12-24V and mustn't be overloaded.

2, There is no battery in the new remote controller, please instal a couple of standard AAA Battery before using.

3, Please correctly connect the line according to the wiring diagram.

4, A single remote controller can control 4 groups receivers and each group can run no more than 4 receivers. Otherwise, there will be a signal attenuation.

5, The max 30 meters remote control distance was tested in open space. It may be shorter in narrow space or somewhere contain many obstacles.