T10 / T125 Toroidal Coil , High Efficiency Inductor EMI E496341 Certificated

T10 / T125 Toroidal Coil , High Efficiency Inductor EMI E496341 Certificated

Toroidal Coil

It is a sensor to measure welding current. A copper wire is multi-lapped around belt-shaped core. Also, it is called Rogowskii coil, whose theory has been known since early times.

When a current i flows through a conductor, magnetic field is generated by Ampere's right-screw law. Magnetic flux intercrosses the coil, generating electro-motive force v in the coil

Output voltage v in the coil is proportional to coil cross section and the number of turns of winding; therefore, accurate measurement is conducted by means of toroidal windings

Toroidal coil features an air-cored coil which measures a large current without saturation. As the electro-motive force, however, is differential, it needs to be integrated through electronic circuit to restore waveform and to be an effective value.

Toroidal coil is applied to a current path (secondary conductor) extending from welding transformer to electrode. The coil is coupled with Miyachi Weld Checker for weld quality control, and it is also coupled with welding power supply for feedback control.

Features

A toroid has a magnetic field inside of itself that forms a series of concentric circles. Outside of it, the field is zero. The strength of this magnetic field depends on the number of coils the toroid has on its body. The field is not uniform, because the field is stronger near the inner part of the ring than it is nearer the outer part. This means that if r is the radius of the transformer, the magnetic field decreases as r becomes larger.

Our advantage

1. High quality and Competitive price

2. Good after-sale service

3. High-temperature resistant

Our company to applied the international advanced technologies, which is committed to R & D and production for the inductive element in different areas, it mainly used in Solar energy inverter, Switching power supply, Inverter DC welding machine, Industrial frequency induction heating, LED lighting, Household appliances, Medical and health care equipments, etc..

Our company has rich experienced R & D team, with the design and manufacturing of inductive components (Bel Fuse, Pulse, MeiXing), very familiar with the magnetic material and the international standards such as UL standard, in UL CLASS B, C insulation system, F grade, and is equipped with advanced testing equipment and solid design software as supported.

Careful management with the implementation of 7S, and our design team from photovoltaic inverter, switching power supply, inverter DC welding machine, industrial frequency induction heating, LED lighting, household appliances and ecological energy fields provide the best benefit cost of various design solutions and strong technical support.

The main production and processing equipment:
Single axis, four axis winding machine, twelve axis automatic winding machine.
The microwave coil self checking machine.
Full automatic production line,
Automatic jet printer,
Vacuum (limited) varnish machine,

To provide the following materials used and comply with safety regulations of the bobbin:
PET-FR530 DuPont E69578 (M)
Nylon 70G33L DuPont E41938 (M)
BASF A3X2G7 BASF E41871
T375J Taiwan: Changchun E59481 (S)
PM9630 Sumitomo E41429 (M)
PM9820 Sumitomo E41429 (M)

Test instrument:
The Agilent 4294A, E4980A, 4263B, and Chroma 3250 comprehensive precise LCR Measurement & analyzer.
The Wayne Kerr DC bias current source 3265B and precise magnetic element analyzer 3260B.
Hi-pot test (0~5KVac).
High temperature cycle test (-70 to 200 DEG C IEC60068-2-1/2-2/-2-30/-2-78 standard)