Add to Cart
Dustless Low Noise Fibre Glass Body Manual Water Sandblaster For Aluminum Products
Model:6868WA
Technical Specifications:
Technical specifications | Chamber dimension | 680X680X500mm |
Load Capacity | less than 10kgs | |
Motor for pump | AC220v,50Hz, 550w | |
Air consumption | 0.8~1.2m³/min | |
Air pressure | 0.3~0.7MPa | |
Diameter of blasting hose | Φ13mm*23mm | |
Lighting | AC220v, 13w | |
Quantity of gun | 1pc | |
Initial media feeding | 5~10kgs(together with 25kgs water) | |
Power supply | 220v, 50hz |
Wet Sandblaster Series(Fibre Glass Body):
model | dimension of cabinet(mm) | quantity of gun | raw material of cabinet | remarks |
6868W | 680X680X600 | 1pc | fibre glass | optional s/s body |
9065W | 900X650X600 | 1pc | fibre glass | optional s/s body |
9090W | 900X900X700 | 1pc | fibre glass | optional s/s body |
1212W | 1200X1200X800 | 1pc | fibre glass | optional s/s body |
1. Pretreatment: Electroplating, spray paint, spray, etc. All are
covered sandblasting before machining, surface is absolutely clean,
at the same time greatly improve the coating adhesion and corrosion
resistance ability.
2. Clean up: Casting parts, stamping parts, welding parts, such as
metal artifacts to scale, residue, dirt; Cleaning the surface of
non-metallic products, ceramic embryo dark spots on the surface of
the clear lacquer and reduction pattern, etc.
3. Old refurbished: Automobile, motorcycle, mechanical and
electrical equipment and clean all moving parts. At the same time,
eliminate fatigue stress, prolong service life.
4. Finishing: All metal and non-metal products (plastic, crystal,
glass, etc.) can eliminate surface, dumb matte processing, make the
product surface level.
5. Mold processing: Mold surface and matte treatment, graphic
production, as well as mold cleaning, do not hurt and die surface,
ensure accuracy of mould.
6. Burrs treatment: Small burr removal machining parts, plastic
injection parts glue burrs.
7. Bad product rework: Bad product coating removal, remove bad
surface coloring and printing.
8. Enhance the hardness on the surface of the metal, eliminate
stress, such as the plane leaves, spring, mechanical cutters and
weapons and other surface treatment.
9. Etching antiskid processing: Etching pattern in the surface of
metal products and non-metallic products, words and antiskid
processing, such as marble, handle non-slip, seal, stone lettering,
etc.
10. The processing of jeans: Jeans sanding, pale and cat must
effect is achieved.
Applications:
1. Dust-free wet blasting, reduces worker exposure to dust and
particles, reduces static electricity build-up generated by dry
blasting.
2.Long blasting gloves(24"), wear resisting rubber,effectively
protect oprtator
3. Reinforced fiber glass cabinet provide rust-free blasting
environment.
4. Safety interlocks interrupt blasting if either door is opened.
5. Sopylights brightly illuminates work chamber.
6. Exhauster maximizes visibility inside cabinet.
7. Electric powered Windscreen wipers maintains clean window for
clear view of work.
8. Foot pedal activates blast process and minimizes operator
fatigue.
9. Built-in fingertip-activated squirt gun rinsing the parts inside
the working cabinet.
10. Pressure regulator, gauge, and electric switch mounted within
easy reach.
Competitive Advantage:
The rusting cleaning part adopts high-efficient blast wheel and full shutter type shot sand separator.
The sweeping machine adopts specially made high-strengh nylon rolling brush and high-pressure ventilator.
The preheating and drying parts may adopt various heating methods.
The paint spraying part adopts high-pressure airless spraying method.